|
18V X2 LXT Cordless 10" Dual‑Bevel Sliding Miter Saw
Makita is a pioneer in brushless motor engineering, battery technology, and miter saw innovation and has combined this expertise in the 18V X2 (36V) LXT' Lithium-Ion Brushless 10" Dual-Bevel Sliding Compound Miter Saw. It's powered by two 18V Lithium-Ion batteries for 36V power and performance, but without leaving the 18V LXT' platform. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life. The XSL06 has an efficient BL Brushless Motor that delivers up to 4,400 RPM for fast and efficient cutting, with Automatic Speed Change technology to adjust cutting speed and torque under load for optimum performance.
The XSL06 has a unique 2-steel rail sliding system design that offers single slide-glide operation for smooth and dead-on accurate cutting right out of the box, as well as a reduced overall footprint that allows the saw to be positioned flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4") and crown molding cutting capacity (6-5/8" nested), the largest in its class. It will also crosscut a 4x12 at 90 degrees. The saw miters 0-deg to 60-deg left and right, with positive stops at 0-deg, 15-deg, 22.5-deg, 31.6-deg, 45-deg and 60-deg (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0-deg to 48-deg (left and right).
The direct-drive gearbox with a soft start is a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. Additional features include a high-quality 60T carbide-tipped blade, built-in laser that indicates the line-of-cut, and improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Powered by two LXT batteries; X2 LXT' technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL Motor delivers 4,400 RPM for faster and smoother cutting
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance
- X2 LXT' technology delivers up to 334 cuts per charge in 2x4 SPF and up to 192 cuts per charge in 2x12 SPF lumber using two 5.0Ah batteries
- Increased capacity for up to 6-5/8" crown molding (vertically nested), 5-1/4" baseboard (vertical), and 12" crosscuts at 90-deg
- Unique 2-Steel Rail Sliding System design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall
- In-front bevel lock for convenient operation
- Dual dust collection ports provide excellent dust extraction performance
- Miters 0-60-deg left and right; bevels 0-48-deg left and right
- Positive miter stops at: 0-deg, 15-deg, 22.5-deg, 31.6-deg, 45-deg, and 60-deg left or right
- Integrated 4-3/4" tall fence system for increased rigidity and more precise miter and bevel cuts
- Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting
- Linear ball bearing system engineered to deliver accurate cuts
- Large-sized aluminum base improves stability of material for efficient cutting
- High power provides efficient cutting in wood and aluminum extrusion (aluminum blade and cutting lubricant sold separately)
- Electric brake for maximum productivity
- Direct drive motor for increased cutting efficiency and reduced maintenance
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Easy one-touch slide lock for convenience
- Simple 90-deg turn-of-the-knob miter angle lock/unlock mechanism
- Rubberized soft grip handle provides increased comfort on the job
- Metal extension wings for durability
- Ergonomic rubberized horizontal D-handle design for better fit and added comfort
- See-through blade guard system for greater visibility of blade and line of cut
- 3-stage L.E.D. gauges on the tool indicate battery charge levels
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
- 18V LXT' Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- 18V LXT' Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Dual Port Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Dual Port Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- Weighs 60.6 lbs. with batteries
- 3-year limited warranty on tool, battery and charger
- Only use genuine Makita batteries and chargers
View Details
|
TXSL06PT |
18V X2 LXT Cordless 10" Dual‑Bevel Sliding Miter Saw |
1 |
Call for Price |
|
XSL06PT |
|
|
18V X2 LXT Lithium‑Ion Brushless Cordless Recipro Saw
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 (36V) LXT Lithium-Ion Brushless Recipro Saw Kit. It's powered by two 18V Lithium-Ion batteries for 36V power and performance and has an electronically-controlled BL Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting and demolition that traditionally called for a corded recipro saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries on the XRJ06PT as they use across the Makita 18V LXT cordless tool system.
The XRJ06PT is equipped with efficiency features for faster cutting. The long 1-1/4" stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include an L.E.D. light to illuminate the line of cut, retractable tool hook, and "tool-less" blade change for faster blade installation and removal.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- X2 LXT technology delivers up to 155 cuts per charge in 2x10 SPF lumber using two 5.0Ah batteries
- Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute
- Long 1-1/4" stroke length provides increased cutting efficiency
- Refined crank mechanism design minimizes blade deflection and reduces vibration
- Built-in L.E.D. light with preglow and afterglow illuminates the work
area
- Retractable tool hook secures the tool when not in use
- "Tool-less" blade change system allows for faster blade installation and removal for increased productivity
- Rubberized soft grip handle provides increased comfort on the job
- Ergonomic design at only 17-3/4" long
- Weighs only 10.2 lbs. with battery for reduced operator fatigue
- Large two-finger variable speed trigger for operator convenience
- Reinforced fixed shoe for added durability
- Efficient BL Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Electric brake for maximum productivity
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Dual Port Rapid Optimum Charger charges two batteries at the same time
- The Dual Port Rapid Optimum Charger communicates with the batteries built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- For more efficient charging, the Dual Port Rapid Optimum Charger has built-in fans to cool the batteries faster
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year limited warranty on tool, battery and charger
View Details
|
TXRJ06PT |
18V X2 LXT Lithium‑Ion Brushless Cordless Recipro Saw |
3 |
Call for Price |
|
XRJ06PT |
|
|
18V LXT Brushless Cordless 2‑Pc. Combo Kit - with 2 Chargers
Makita is the innovation leader in brushless motor technology, and the XT275PT Combo Kit provides two BL Brushless Motor tools that deliver longer run time, increased power and speed, and longer tool life.
The XT275PT includes a brushless hammer driver-drill with two speeds and 530 in.lbs. of torque, and a brushless 3-speed Impact Driver with 1,550 in.lbs. of torque for efficient fastening. Both tools are equipped with Extreme Protection Technology (XPT), which is engineered to provide increased dust and water resistance in harsh job site conditions. The kit includes two 18V LXT 5.0Ah batteries, and both will reach a full charge in only 45 minutes on the efficient 18V LXT Dual Port Charger, which charges two batteries at the same time for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2,000 RPM) delivers 530 in.lbs. of Max Torque; weighs only 4.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- Hammer Driver-Drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Impact Driver with 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM); delivers 1,550 in.lbs. of Max Torque and weighs only 3.3 lbs. with battery
- Impact Driver features Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or work piece
- Dual port charger charges two batteries at the same time
- Charges two (2) 18V LXT Lithium-Ion 5.0Ah batteries in only 45 minutes
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B features an integrated L.E.D. battery charge level indicator
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger
- 3-year limited warranty on tool, battery and charger
View Details
|
TXT275PT |
18V LXT Brushless Cordless 2‑Pc. Combo Kit - with 2 Chargers |
1 |
Call for Price |
|
XT275PT |
|
|
18V LXT Lithium‑Ion Cordless 5‑7/8" Metal Cutting Saw
Makita is the leader in brushless motor technology, and the 18V LXT Lithium-Ion Brushless Cordless 5-7/80 Metal Cutting Saw (model XSC02Z, tool only) delivers faster metal cutting through Unistrut, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4" cutting capacity, it is ideal for electrical contractors since it will cut 20 conduit in one pass - a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
Makita offers four optimum 5-7/8" blade options for use with the XSC02Z: 32T carbide tipped for metal and general purpose; 52T for thin metal; 52T for aluminum; and 60T for stainless steel (all sold separately).
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance
- Large cutting capacity (2-1/40 at 90-deg) allows for 2" conduit to be cut in a single pass
- BL Motor delivers 3,900 RPM for faster cutting
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Cuts a wide range of metals including Unistrut, all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more
- Can be used with Makita 5-3/8" metal cutting blades
- Compact and ergonomic design at only 13-1/8" long
- Weighs only 6.4 lbs. with battery (battery not included) for reduced operator fatigue
- Soft grip handles provide increased comfort on the job
- Electric brake for maximum productivity
- Dual L.E.D. lights illuminates the work area
- Stainless steel base reduces chip build-up to prevent surface damage
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately)
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger sold separately)
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
- Battery and charger sold separately
- 3-year limited warranty
- Only use genuine Makita batteries and chargers
View Details
|
TXC02Z |
18V LXT Lithium‑Ion Cordless 5‑7/8" Metal Cutting Saw |
1 |
Call for Price |
|
XSC02Z |
|
|
18V LXT Lithium-Ion Cordless 18 Gauge Straight Shear
The Makita 18V LXT Lithium-Ion Cordless 18 Gauge Straight Shear (model XSJ01Z, tool only) combines high speed, compact size and less weight. The XSJ01Z has a Makita-built 4-pole motor for faster cutting, yet it weighs just 5.3 lbs. (with battery, sold separately) for better control in cutting steel and stainless steel sheet metal.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
The XSJ01Z features a Makita-built 4-pole motor that delivers 2,800 strokes per minute (SPM) for faster cutting. The tough double-cut shear design handles up to 18 gauge mild steel and 20 gauge stainless steel for straight or scribe cuts without deforming the material. The swivel shear head rotates 360 degrees for increased cutting options.
The XSJ01Z weighs just 5.3 lbs. (with battery, sold separately) with a more compact design at 13-3/4" long and an ergonomic shape that fits like a glove for reduced operator fatigue. The deep reversible belt-clip attaches to either side for secure attachment to tool belts, and the wrench for head adjustment stows away under the handle for added convenience. The XSJ01Z is also equipped with a lock-off switch that immobilizes the trigger for storage or transport.
- Makita-built 4-pole motor delivers 3,000 strokes per minute for faster cutting
- Cuts up to 18 gauge mild steel and 20 gauge stainless steel
- Compact and ergonomic design at only 13-3/4" long
- Weighs only 5.3 lbs. with battery (battery not included) for reduced operator fatigue
- Reversible belt clip attaches to either side of the tool
- Rubberized soft grip handle provides increased comfort on the job
- Swivel shear head rotates 360-deg for increased cutting options and added convenience
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging, over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately)
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger sold separately)
- Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
- 3-year limited warranty
View Details
|
TXSJ01Z |
18V LXT Lithium-Ion Cordless 18 Gauge Straight Shear |
2 |
Call for Price |
|
XSJ01Z |
|
|
18V LXT Lithium‑Ion Cordless Cut‑Out Saw
For straighter, more accurate cutting in vertical and overhead applications, Makita has a solution with the 18V LXT Lithium-Ion Cordless Cut-Out Saw (model XDS01Z, tool only). It's designed to cut openings in installed board, including drywall and plywood, and will cut up to 984 feet of 1/2" drywall on a single charge using a 4.0Ah battery (sold separately). To help prevent damage to objects behind the board being cut, it has a short 1/4" stroke length with an adjustable blade depth up to 1-3/16" (9/16" in wood). For improved dust extraction, the XDS01Z has a dust port with a clear dust box for increased visibility. It is ideal for cut-outs and drywall repair applications.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Makita-built variable speed motor delivers 0-6,000 strokes per minute for faster and more efficient cutting
- Designed to cut openings in installed board with an adjustable blade depth up to 1-3/16" (9/16" in wood)
- Cuts up to 984 feet of 1/2" drywall on a single charge using 4.0Ah battery BL1840B (battery not included)*
- Short 1/4" stroke length with adjustable blade depth helps prevent damage to objects behind the board being cut
- Clear dust box for dust containment with increased visibility for operator convenience
- Built-in dust port swivels for increased maneuverability when connected to vacuum hose
- Dual L.E.D. lights with afterglow illuminate the work area
- Non-marring plastic base cover protects drywall surface from potential damage caused by the metal base
- Variable speed trigger enables user to match the speed to the application for greater versatility
- Rubberized soft grip handle for increased operator comfort
- 3-stage L.E.D. gauge indicates battery charge level
- Weighs only 4.2 lbs. with battery (battery not included) for reduced operator fatigue
- Blade cover with on-board storage protects blade and material surface from damage when saw is not in use
- Blade wrench attaches to the saw for fast and convenient blade changes
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately)
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger sold separately)
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
- Battery and charger sold separately
View Details
|
TXDS01Z |
18V LXT Lithium‑Ion Cordless Cut‑Out Saw |
1 |
Call for Price |
|
XDS01Z |
|
|
18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit
The Makita 18V LXT- Lithium-Ion Brushless Cordless 1/2" Hammer Driver-Drill (XPH12T) is an ideal drilling and driving solution for the user who wants more features. The XPH12T combines 530 in.lbs. of Max Torque with an efficient brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. For drilling into masonry, simply switch to the percussive hammer driver-drill setting. It weighs only 4.2 lbs. (with battery) for increased comfort and superior power-to-weight ratio. The kit includes two efficient 18V LXT- 5.0Ah batteries, and each reach a full charge in only 45 minutes - the fastest charge-time in the category - for less downtime and increased productivity.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls-. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT- and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Variable 2-speed design (0-500 & 0-2,000 RPM) (0-7,500 & 0-30,000 BPM) covers a wide range of drilling, driving and hammer applications
- BL- Brushless Motor delivers 530 in.lbs. of Max Torque
- Efficient BL- Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL- Brushless Motor eliminates carbon brushes, enabling the BL- Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL- Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Features Extreme Protection Technology (XPT-) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Compact and ergonomic design at only 7-1/8" long
- Weighs only 4.0 lbs. with battery for reduced operator fatigue
- Rubberized soft grip provides increased comfort on the job
- Dual L.E.D. lights illuminate the work area
- All metal gear housing for increased job site durability
- 18V LXT- Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT- Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Equipped with Star Protection Computer Controls- to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year limited warranty on tool, battery and charger
- Only use genuine Makita batteries and chargers
View Details
|
TXPH12T |
18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit |
Out of stock |
Call for Price |
|
XPH12T |
|
|
18V LXT Lithium-Ion Cordless 20 L.E.D. Work Light,
The 18V LXT Lithium-Ion Cordless/Corded L.E.D. Floodlight (DML805) offers the convenience of cordless or corded operation, and provides bright and even lighting for large work spaces without the high heat of halogens. At full brightness it provides 750 lumens of light, and 450 lumens on low mode. The fast-charging 18V LXT Lithium-Ion 4.0Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge. It also features Extreme Protection Technology (XPT) for improved dust and water resistance. It is fully compatible with Makita 18V Lithium-Ion batteries.
- 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
- Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT battery on High mode (battery and charger not included)
- Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT battery on Low mode (battery and charger not included)
- L.E.D. lights effectively illuminate work area without the high heat of halogens
- Adjusting knobs enable the user to direct the flood light to desired
angle
- Battery or corded operation; compatible with 18V LXT batteries (battery not included)
- Back up power is provided by an 18V LXT battery and keeps the flood light on if AC power is lost (charged battery must be installed)
- AC cord is easily stored and wrapped around mounting stand base
- Integrated handle can be used as a hanging hook for user convenience
- Light will flash to alert user when battery charge is low (battery not included)
- Compact design at only 8-3/8" long
- Weighs only 5.7 lbs. with battery (battery not included)
- Work light can be mounted on optional tripod light stand individually or with two flood lights (tripod light stand not included)
- Work light can be mounted on optional pipe clamp light stand (pipe clamp light stand not included)
- 3-year warranty on flood light
- Battery and charger sold separately
- Only use genuine Makita batteries and chargers
View Details
|
TDML805 |
18V LXT Lithium-Ion Cordless 20 L.E.D. Work Light, |
5 |
Call for Price |
|
DML805 |
|
|
18V LXT Lithium‑Ion Brushless Cordless Jig Saw
Makita is a leader in brushless motor technology, and the Makita 18V LXT Lithium-Ion Brushless Cordless Jig Saw (model XVJ02Z, tool only, battery and charger sold separately) seamlessly combines precision and power with the efficiency of brushless. The XVJ02Z is engineered to deliver the power and performance of a corded jig saw - without the hassles of a cord. It is ideal for professional woodworkers, cabinetry makers, specialized residential construction workers and any pro-contractor seeking a best-in-class cordless jig saw.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
The XVJ02Z features a brushless motor and has 3 orbital settings plus straight cutting for faster and more accurate cuts in a variety of materials. The variable speed control dial (800-3,500 SPM) enables users to match the speed to the application. In addition, the efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. And since there are no carbon brushes, the BL Brushless motor runs cooler and more efficiently for longer life.
Convenience features include a tool-less blade change system that allows for faster blade installation and removal, and a large 2-finger variable speed trigger with lock-on button. The heavy-gauge aluminum base is engineered for smooth, accurate cutting and added durability, and the dual L.E.D. lights illuminate the work area. It weighs only 5.8 lbs. with battery (sold separately).
- Makita-built brushless motor and 3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials
- Variable 6-speed control dial (800-3,500 SPM) enables user to match the speed to the application
- No-load speed reduction feature automatically reduces SPM for more accurate cutting starts
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and SPM to the changing demands of the application
- "Tool-less" blade change system allows for faster blade installation and removal for increased productivity
- Large 2-finger variable speed trigger for added convenience with lock-on button
- Heavy gauge aluminum base for smooth, accurate cutting and added durability
- 0- 45 left or right bevel capacity for enhanced cutting performance
- Dual L.E.D. lights illuminate the work area
- Rubberized soft grip handle provides increased comfort on the job
- Built-in dust blower clears the line of cut for increased accuracy
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Weighs only 5.8 lbs. with battery (battery not included) for reduced operator fatigue
- Compact and ergonomic design at only 10-1/2" long
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately)
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger sold separately)
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
- 3-year limited warranty
- Battery and charger not included
View Details
|
TXVJ02Z |
18V LXT Lithium‑Ion Brushless Cordless Jig Saw |
2 |
Call for Price |
|
XVJ02Z |
|
|
18V Lithium‑Ion Cordless 16 Gauge Compact Straight Shear
The Makita 18V LXT Lithium-Ion Cordless 16 Gauge Straight Shear (model XSJ02Z, tool only) combines high speed and increased maneuverability in a compact size with less weight. The XSJ02Z has a Makita-built 4-pole motor with 4,300 strokes per minute for faster cutting, yet it weighs only 5.1 lbs. (with battery, sold separately) for better control in cutting steel and stainless steel sheet metal.
The XSJ02Z features a high performance double blade design that minimizes material distortion and produces clean cuts with minimal burrs. It will cut up to 16 gauge mild steel, 18 gauge stainless steel and 12 gauge aluminum. For increased application versatility it has a radius cutting capability of 9-7/8" diameter. Convenience features include a barrel grip design, rubberized soft grip handle, and a slide switch with lock-on capability for continuous operation.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Cuts up to 16 ga. mild steel, 18 ga. stainless steel and easily cuts through 22 ga. spiral duct seams
- Makita-built 4-pole motor delivers 4,300 strokes per minute for faster cutting
- Compact barrel grip design with rubberized soft grip enables one-handed operation in various orientations
- High performance double blade design minimizes material distortion and produces clean cuts with minimal burrs
- Radius cutting capability allows for easy turns and circular cutting applications
- Anti-restart protection is designed to prevent motor start up when battery is inserted with switch locked on
- Built-in alert light provides overload motor protection warning and low battery recharge warning for operator convenience
- Slide switch with lock-on capability for continuous operation
- Solid aluminum housing for added durability
- Externally accessible brushes for easy serviceability
- On-board wrench storage for quick and easy blade adjustment or
replacement
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging, over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately)
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger sold separately)
- Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
View Details
|
TXSJ02Z |
18V Lithium‑Ion Cordless 16 Gauge Compact Straight Shear |
Discontinued |
Call for Price |
|
XSJ02Z |
|
|
12V Max CXT Lithium‑Ion Cordless Self‑Leveling Lazer
Makita has an expanding line of laser instruments engineered for increased accuracy and productivity. The 12V max CXT Self-Leveling Multi-Line Green Laser (SK209GDZ, tool only, batteries and charger sold separately) is a highly precise, highly visible and durable laser for leveling, aligning, plumbing, and squaring. The green beam laser technology provides increased visibility in bright light job site environments, and fast self-leveling line stability is achieved in 3 seconds for increased productivity.
Durability features include highly protected laser windows that are recessed into the housing for increased durability, pendulum lock for added protection of laser diode during transport and storage, and a rubberized carrying handle designed to position out of the way while operating and provide additional stand-up stability in handle down position. It has dust and water resistance with IP 54 rating for increased durability in harsh job site environments. It includes an integrated 5/8" thread for mounting to Makita Tripod (#TK0LM1001F & TK0LM5030F) or Makita Wall Bracket (#TK000ET03F) for increased versatility (Makita Tripods and Wall Bracket sold separately).
For longer run time, 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4.0Ah battery (BL1041B). 12V max CXT Lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It's part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.
- 12V max CXT battery delivers the convenience of a rechargeable tool battery and up to 40 hours of continuous run time (battery not included)
- Selectable one horizontal, two vertical reference lines and plumb point required for level, align, plumb and square applications
- Best-in-class accuracy of +/-1/16" at 33'
- Bright 515 nm class II laser for best-in-class visibility
- Fast self-leveling line stability is achieved in up to 3 seconds for increased productivity
- 360-deg rotating base with fine vertical line adjustment knob for increased accuracy
- Power connector port allows 18V LXT Lithium-Ion Battery to be used as alternate power source with Power Source Adapter (ADP05) and Adapter Cord (199006-4) (adapter and cord sold separately)
- Permanent laser detection mode enables line detection with Makita Laser Detector (TK0LDG301F)
- Telescoping legs adjust to desired height providing stability over uneven surfaces or positioning over raised objects
- Pendulum lock offers added protection of laser diode during transport and storage
- Dust and water resistance with IP 54 rating for increased durability
- Highly protected laser windows are recessed into the housing for increased durability
- Rubberized carrying handle is designed to position out of the way while operating and provide additional stand-up stability in handle down position - Integrated 5/8" thread allows for mounting to Makita Tripods (TK0LM1001F and TK0LM5030F) or Makita Wall Bracket (TK000ET03F) for increased versatility
- Battery Protection Circuit protects against overloading, over-discharging and over-heating
- Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size
- Not compatible with 12V max pod-style tools, batteries and chargers
- Battery and charger not included
View Details
|
TSK209GDZ |
12V Max CXT Lithium‑Ion Cordless Self‑Leveling Lazer |
1 |
Call for Price |
|
SK209GDZ |
|
|
18V LXT Brushless Cordless 5‑7/8" Metal Cutting Saw
Makita is the leader in brushless motor technology, and the 18V LXT Lithium-Ion Brushless Cordless 5-7/8" Metal Cutting Saw (model XSC02T) delivers faster metal cutting through Unistrut, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4" cutting capacity, it is ideal for electrical contractors since it will cut 2" conduit in one pass - a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw. The kit includes two fast-charging 18V Lithium-Ion 5.0Ah batteries and a Rapid Optimum Charger.
Makita offers four optimum 5-7/8" blade options for use with the XSC02T: 32T carbide tipped for metal and general purpose; 52T for thin metal; 52T for aluminum; and 60T for stainless steel (all sold separately).
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance
- Large cutting capacity (2-1/4" at 90-deg) allows for 2" conduit to be cut in a single pass
- BL Motor delivers 3,900 RPM for faster cutting
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Cuts a wide range of metals including Unistrut, all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more
- Can be used with Makita 5-3/8" metal cutting blades
- Compact and ergonomic design at only 13-1/8" long
- Weighs only 6.4 lbs. with battery for reduced operator fatigue
- Soft grip handles provide increased comfort on the job
- Electric brake for maximum productivity
- Dual L.E.D. lights illuminates the work area
- Stainless steel base reduces chip build-up to prevent surface damage
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year limited warranty on tool, battery and charger
View Details
|
TXSC02T |
18V LXT Brushless Cordless 5‑7/8" Metal Cutting Saw |
2 |
Call for Price |
|
XSC02T |
|
|
18V LXT Lithium‑Ion 1" Rotary Hammer Kit
The 18V LXT Lithium-Ion Brushless 1" Rotary Hammer with HEPA Dust Extractor Attachment (model XRH011TX) combines Makita BL Brushless Motor Technology with concrete dust extraction - without the cord. The XRH011TX was the industry's first 1" capacity rotary hammer in the 18V category and sets new standards in the cordless tool category.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
The XRH011TX is powered by an efficient BL Brushless Motor with variable speed that delivers 0-950 RPM, 4,700 BPM, and 1.7 ft.lbs of impact energy, with up to 50% longer run time than current Makita 18V LXT rotary hammers. The efficiency of the BL Brushless Motor allowed Makita engineers to power both the tool and the separate vacuum motor with a single 18V (not 36V) Lithium-Ion battery. The separate vacuum motor also increases suction efficiency without sacrificing the performance of the rotary hammer. The result is a powerful and efficient rotary hammer with vacuum attachment that delivers the same drilling capacity as the leading competitors' 36V rotary hammers, but with up to 2.5 lbs. less weight (with battery).
- Powerful BL Brushless motor delivers 0-950 RPM, 0-4,700 BPM and 1.7 ft.lbs. of impact energy to handle the most demanding applications
- The on-board dust extractor attachment captures concrete dust during drilling and is activated by the tool for operator convenience
- Extractor is powered by a separate motor to maintain drilling performance and provide a 2-second delay to help capture remaining dust
- Efficient HEPA filtration system captures 99.97% of particulates .3 microns and larger
- Transparent dust container provides needed visibility in determining when the dust box needs to be emptied
- Torque Limiting Clutch prevents gear damage by automatically disengaging gears if the bit binds
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Weighs only 10.3 lbs. with battery for reduced operator fatigue
- Variable speed trigger enables user to match the speed to application for greater versatility
- Multiple Chisel Positions has 40 different positions to align tool more comfortably with the application
- Job site tested shock absorbent handle protects the battery housing for extra durability
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita Technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year limited warranty on tool, battery and charger
View Details
|
TXRH011TX |
18V LXT Lithium‑Ion 1" Rotary Hammer Kit |
2 |
Call for Price |
|
XRH011TX |
|
|
18V LXT Lithium‑Ion Sub‑Compact Brushless 2‑Pc. Combo Kit
Makita created a new class in cordless with 18V LXT Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world's largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving, and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill with two-speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two-speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins. The kit includes two 18V LXT Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger - the fastest charge-time in the category - for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Driver-Drill weighs only 2.8 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 6-3/8" long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and driving applications
- BL Brushless Motor delivers 350 in.lbs. of Max Torque
- Impact Driver weighs only 2.6 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 5-5/16" long
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until impact begins
- Variable 2-speed (0-1,300/0-3,000 RPM & 0-1,600/0-3,900 IPM) for a wide range of fastening applications
- BL Brushless Motor delivers 1,240 in.lbs. of Max Torque in an ultra compact design
- Ideal for work in tight spaces
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- 18V Compact LXT Lithium-Ion 2.0Ah battery BL1820B features an integrated L.E.D. battery charge level indicator, provides up to 50% more run time per charge, and reaches full charge in 25 minutes or less
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
View Details
|
TCX200RB |
18V LXT Lithium‑Ion Sub‑Compact Brushless 2‑Pc. Combo Kit |
1 |
Call for Price |
|
CX200RB |
|
|
18V LXT Lithium‑Ion Cordless 3/8" Angle Drill Kit (3.0Ah)
The Makita 18V LXT Lithium-Ion Cordless 3/8" Angle Drill (model XAD01Z) delivers cordless drilling power into tough-to-reach spaces.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
The XAD01 features a Makita-built 4-pole motor that delivers 121 in. lbs. of Max Torque, with an all-metal transmission and 0-1,800 RPM's for a wide range of drilling and driving tasks into steel and wood.
The XAD01 weighs only 4.0 lbs. (with battery) with over one foot of tool extension for extra reach into tough-to-reach spaces. The tool has a 3/8" keyed metal chuck for improved bit gripping power. In addition, the keyed chuck allowed engineers to reduce the size of the angle drill head to a very compact height of 2-5/8", making it ideal for use in close quarters applications. The soft grip handle and conveniently-located paddle switch are designed for comfortable operation. The built-in L.E.D. light illuminates the work surface for more efficient work.
The XAD01 brings cordless drilling power into tough-to-reach spaces. The compact, angled design makes it perfect for assembly, garage door installation, steel framing, woodworking, electrical, and any other job that requires a best-in-class engineered cordless angle drill in close-quarters applications.
- Makita-built 4-pole motor delivers 121 in.lbs. of Max Torque
- Variable speed (0-1,800 RPM) for a wide range of drilling and driving applications
- 3/8" keyed metal chuck for improved bit gripping power
- Compact 2-5/8" angle head height for use in close quarters
- Compact and ergonomic design at only 12-3/8" long
- Weighs only 4.0 lbs. with battery for reduced operator fatigue
- Built-in L.E.D. light with afterglow illuminates the work area
- Large paddle switch and soft grip provide increased comfort on the job
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
View Details
|
TXAD01 |
18V LXT Lithium‑Ion Cordless 3/8" Angle Drill Kit (3.0Ah) |
Discontinued |
Call for Price |
|
XAD01 |
|
