|
REBAR 5/8" X 20'
Reinforced bar, commonly used in concrete and masonry structures.
- Applicable Materials: Asphalt
- Diameter: 5/8"
- Length: 20'
- Material: Steel
- Lasts longer than conventional asphalt coatings
- Fast-drying/drive ready in 4 hrs
- Formulated with recycled rubber tires
- Stirs like paint, rolls like paint
- 1, two-gallon bucket of epoxyshield blacktop coating equals two 5 gallon buckets of conventional asphalt coating
View Details
|
MASREBAR5 |
REBAR 5/8" X 20' |
167 |
Call for Price |
|
|
|
|
REBAR 3/8" X 18"
Reinforced bar, commonly used in concrete and masonry structures.
- Applicable Materials: Asphalt
- Diameter: 3/8"
- Length: 18"
- Material: Steel
- Lasts longer than conventional asphalt coatings
- Fast-drying/drive ready in 4 hrs
- Formulated with recycled rubber tires
- Stirs like paint, rolls like paint
- 1, two-gallon bucket of epoxyshield blacktop coating equals two 5 gallon buckets of conventional asphalt coating
View Details
|
MASREBAR4 |
REBAR 3/8" X 18" |
400 |
Call for Price |
|
|
|
|
REBAR 1/2" X 20'
Reinforced bar, commonly used in concrete and masonry structures.
- Applicable Materials: Asphalt
- Diameter: 1/2"
- Length: 20'
- Material: Steel
- Lasts longer than conventional asphalt coatings
- Fast-drying/drive ready in 4 hrs
- Formulated with recycled rubber tires
- Stirs like paint, rolls like paint
- 1, two-gallon bucket of epoxyshield blacktop coating equals two 5 gallon buckets of conventional asphalt coating
View Details
|
MASREBAR3 |
REBAR 1/2" X 20' |
180 |
Call for Price |
|
|
|
|
REBAR 1/2" X 10'
Reinforced bar, commonly used in concrete and masonry structures.
- Applicable Materials: Asphalt
- Diameter: 1/2"
- Length: 10"
- Material: Steel
- Lasts longer than conventional asphalt coatings
- Fast-drying/drive ready in 4 hrs
- Formulated with recycled rubber tires
- Stirs like paint, rolls like paint
- 1, two-gallon bucket of epoxyshield blacktop coating equals two 5 gallon buckets of conventional asphalt coating
View Details
|
MASREBAR2 |
REBAR 1/2" X 10' |
84 |
Call for Price |
|
|
|
|
REBAR 1/2" X 24"
Reinforced bar, commonly used in concrete and masonry structures.
- Applicable Materials: Asphalt
- Diameter: 1/2"
- Length: 24"
- Material: Steel
- Lasts longer than conventional asphalt coatings
- Fast-drying/drive ready in 4 hrs
- Formulated with recycled rubber tires
- Stirs like paint, rolls like paint
- 1, two-gallon bucket of epoxyshield blacktop coating equals two 5 gallon buckets of conventional asphalt coating
View Details
|
MASREBAR1 |
REBAR 1/2" X 24" |
257 |
Call for Price |
|
|
|
|
Wooster 4" Bravo Stainer Bristle Polyester Stain Brush
Excellent for all stains, sealers, wood toners (water based or oil based). White Chine bristle/sable polyester blend, square trim. Nickel-plated steel ferrule. Threaded hardwood handle with bucket clip, removes for extension pole use.
- Size: 4"
- Excellent for all stains, sealers, wood toners (water-based or oil-based) - White China bristle/sable polyester blend, square trim
- Nickel-plated steel ferrule
- Threaded hardwood handle with bucket clip, removes for extension pole use
View Details
|
18904 |
Wooster 4" Bravo Stainer Bristle Polyester Stain Brush |
4 |
Call for Price |
|
F5119-4 |
|
|
SCREEN TIGHT .175 X 300' SPLINE
Spline Designed For Screen Tight Porch Screening System And Is Great For Large Screening Jobs. Recommended For Fiberglass Screening To Ensure A Secure Fit Within The System. Easy To Dispense Bucket.
- Vinyl
- Black - 300' Length
- Size In : .175
- 0.175 In Diameter X 300 Ft Screen Spline In Easy Dispenser Project Bucket - Perfect For Large Jobs
- Great For Job-Site Use
View Details
|
SCRBULKSPLINE |
SCREEN TIGHT .175 X 300' SPLINE |
Discontinued |
Call for Price |
|
BULKSPLINE |
|
|
SALT CELL CLEANER 8OZ
PowerWash cell cleaner is a highly concentrated acid that cleans cells quickly. This innovative product removes scale from the salt cell, extending its life and allowing it to operate more efficiently once cleaned. Highly concentrated Removes minerals Cleans cell corrosion Directions for use: Add 4-5 gallons of water to a plastic bucket. Carefully add the full bottle of cell cleaner solution to the bucket and stir to mix thoroughly using a plastic or wooden stirrer. Add cleaner to water, NOT water to cleaner. Turn off power to the unit and remove the cell from plumbing, following the manufacturer's instructions. Exposed metal contacts on the unit which connect the electrode to the controller should be completely covered by waterproof tape or other means to prevent the acid in the cleaner from corroding the contacts. (Do not submerge any wiring if it cannot be disconnected from the unit). While wearing gloves and goggles, immerse the electrode unit in the cleaning solution. Signs of effervescence indicate that the cleaner is dissolving scale from the metal electrodes. Leave the electrodes in the cleaning solution until effervescence stops or for 60 minutes. While wearing gloves and goggles, remove the electrode from the cleaning solution and rinse thoroughly with water. Remove any protective covering that was placed on the contacts. Reassemble the electrode into the chlorinator following manufacturer's directions and start the pump chlorinator. Dispose of spent cleaning solution by pouring into pool with pump on. Wear gloves and goggles while handling the cell cleaning solution. Readjust pH, if needed.
- PowerWash Cell Cleaner is a highly concentrated acid that cleans cells quickly and thoroughly and helps to extend cell life.
- Hydrochloric Acid 10.1%
View Details
|
C62071 |
SALT CELL CLEANER 8OZ |
18 |
Call for Price |
|
350771 |
|
|
3/8"-16 x 3" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 3/8"-16
- Length: 3"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376474 |
3/8"-16 x 3" Elevator Bolt |
4 |
Call for Price |
|
A554K - 4PCS |
|
|
3/8"-16 x 2-1/2" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 3/8"-16
- Length: 2-1/2"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376473 |
3/8"-16 x 2-1/2" Elevator Bolt |
4 |
Call for Price |
|
A554J - 4PCS |
|
|
3/8"-16 x 2" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 3/8"-16
- Length: 2"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376472 |
3/8"-16 x 2" Elevator Bolt |
2 |
Call for Price |
|
A554H - 2PCS |
|
|
3/8"-16 x 1" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 3/8"-16
- Length: 1"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376471 |
3/8"-16 x 1" Elevator Bolt |
3 |
Call for Price |
|
A554G - 3PCS |
|
|
5/16"-18 x 2" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 5/16"-18
- Length: 2"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376470 |
5/16"-18 x 2" Elevator Bolt |
3 |
Call for Price |
|
A554F - 4PCS |
|
|
5/16"-18 x 1-1/2" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 5/16"-18
- Length: 1-1/2"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376469 |
5/16"-18 x 1-1/2" Elevator Bolt |
4 |
Call for Price |
|
A554E - 4PCS |
|
|
5/16"-18 x 1" Elevator Bolt
Originally designed for attaching elevator buckets to conveyor belts, elevator bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed. The large head provides a greater bearing surface for soft materials. They are used often in conveyor systems.
- Diameter: 5/16"-18
- Length: 1"
- Designed for use in conveyor systems
- Large low head provides a flush wide bearing connection in soft materials - Square neck prevents rotation
- Machine threads for use with a nut
- Plain steel bolts not intended for exterior use
View Details
|
376468 |
5/16"-18 x 1" Elevator Bolt |
5 |
Call for Price |
|
A554D - 5PCS |
|
