|
STIHL RMA 460V Self-Propelled Battery Lawn Mower
The STIHL RMA 460 V is the first self-propelled lawn mower in the AK Series. Allowing for self-propelling speeds from 0.6 mph to 2.8 mph with the slide of a lever, the RMA 460 V provides smooth and convenient operation that adjusts to conserve energy and optimize run time. With a 19" steel mowing deck and a 15.85-gallon grass bag, homeowners can enjoy a wide cutting path and the ability to minimize stops needed for emptying. A great fit for small-to medium sized yards, the RMA 460 V conserves battery and extends run time by automatically reducing power when mowing through light grass and increasing power in taller or thicker grass.
- Locking Key prevents accidental starting of the motor.
- Lithium-Ion battery power eliminates the mess and expense of fuel mixtures.
- No gradual drop in power, so you can work at full speed until battery is depleted.
- Instant startup, just push the button and pull the switch lever.
- Multiple Storage Options allow mower to be stowed in three positions: folded or unfolded on all four wheels or upright and folded in the cleaning position with blades facing the wall to save floor space.
- Homeowners can trust that the 19-inch steel mowing deck will provide more durability than a plastic alternative
View Details
|
TRMA460VTOOL |
STIHL RMA 460V Self-Propelled Battery Lawn Mower |
1 |
Call for Price |
|
6368 011 1410 |
|
|
6V/12V Battery Charger
Portable and easy to use! This battery/trickle charger is also commonly referred to as a "bench charger." Features LED indicators and button controls for easy reading and accuracy. It can charge both a 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability. Using the 100 amps emergency start setting is powerful enough to bring cars, SUVs and small trucks back to life!
- ETL certified
- Recessed control panel protects against accidental setting changes. Features LED indicators and button controls for easy reading and accuracy.
- Voltage: 6-volts and 12-volts
- Spark proof for safe operation
- Operation: 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability.
- Suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries
- Automatic charge cycle functionality switches to float mode after fully charging the battery
- Short circuit, overheat and reverse polarity protection will not operate if clamps are reversed
- Charger will enter repair mode if a rapid drop in voltage is detected
- Easy to use! An error notification will light up if a bad connection is detected
- 13.6-Volt Power Supply Mode: Provides DC power supply for powering any 12-volt device (e.g., a tire inflator) or as a memory retainer when replacing a battery
- Active Charging Indicator: Cycles between volts, amps and battery percent - Auto Amperage Detection: Detects best amperage (cycling between trickle and quick or vice-versa) based on battery condition
- Wrap cleats provide convenient cord storage
View Details
|
A52750 |
6V/12V Battery Charger |
1 |
Call for Price |
|
52750 |
|
|
M18 Fuel Quik-Lok 10" Pole Saw Attachment
The M18 Fuel Quik-Lok 10" Pole Saw Attachment is powered by the M18 Fuel Power Head w/ Quik-Lok and is compatible with our Quik-Lok Attachment System. The unit features a 10" Oregon bar and chain which provides you with smooth and fast cuts with minimal kickback. The pole saw attachment includes an automatic oiler for proper chain lubrication, easy access chain tensioner for quick adjustments to chain tension, and a branch hook for added cutting leverage and branch removal. The Quik-Lok Attachments feature protected drive shafts for increased durability against drops and storage elements. The pole saw attachment also utilizes optimized gearing to manage the cordless M18 Fuel Power Head RPM output specifically for cutting applications.
- Compatible with the M18 FUEL Power Head w/ QUIK-LOK
- Automatic Oiler: For Proper Chain Lubrication and Increased Productivity
- Easy Access Chain Tensioner: Quick Adjustments to Chain Tension
- Translucent Oil Reservoir: Clear visibility to oil levels
- Branch Hook: For Added Cutting Leverage and Branch Removal
- Padded Grip: For Optimal Hand Placement and Increased Comfort
- RPM: 4,600
- Bar Length: 10"
- Chain Gauge: .043"
- Chain Pitch: 3/8" Low Profile
View Details
|
T49162720 |
M18 Fuel Quik-Lok 10" Pole Saw Attachment |
1 |
Call for Price |
|
49-16-2720 |
|
|
M18 Fuel Quik-Lok Articulating Hedge Trimmer Attachment
The M18 Fuel Quik-Lok Articulating Hedge Trimmer Attachment is powered by the M18 Fuel Power Head w/ Quik-Lok and is compatible with our Quik-Lok Attachment System. The attachment's articulating mechanism allows for 270? rotation of the blade set, which gives you 13 operating positions and 1 storage position. The hedge trimmer attachment boasts a 20" blade with 1" cut capacity allowing you to clear more material in a single pass. The hedge trimmer attachment includes a tip guard to prevent damage to the blade and surrounding work area, as well as a padded grip for optimal hand placement and increased comfort. The Quik-Lok Attachments feature protected drive shafts for increased durability against drops and storage elements. The hedge trimmer attachment also features optimized gearing to manage the cordless M18 Fuel Power Head RPM output specifically for hedge trimming applications.
- Compatible with the M18 FUEL Power Head w/ QUIK-LOK
- Articulating Head Design: Adjustment Handle And Sliding Adjustment Collar Allow for 270? Blade Set Rotation, Delivering 13 Operating Positions and 1 Storage Position
- Tip Guard: Prevents Damage To Blade and Surrounding Work Area
- Padded Grip: For Optimal Hand Placement and Increased Comfort
- Blade Length: 20"
- Cut Capacity: 1"
- SPM: 3,500
- Length: 60"
- Weight: 5.8 lbs
View Details
|
T49162719 |
M18 Fuel Quik-Lok Articulating Hedge Trimmer Attachment |
1 |
Call for Price |
|
49-16-2719 |
|
|
M18 Fuel Quik-Lok Edger Attachment
The M18 Fuel Quik-Lok Edger Attachment is powered by the M18 Fuel Power Head w/ Quik-Lok and is compatible with our Quik-Lok Attachment System. The unit features an 8" blade and high strength guard for increased durability. The edger includes mud flaps to prevent dirt kickback as well as a skid plate to protect the gearbox from concrete contact. The adjustable wheel allows you to set optimized blade depth and tool angle for maximum control. The Quik-Lok Attachments feature protected drive shafts for increased durability against drops and storage elements. The edger attachment also utilizes optimized gearing to manage the cordless M18 Fuel Power Head RPM output specifically for edging applications.
- Compatible with the M18 FUEL Power Head w/ QUIK-LOK
- High Strength Guard: Metal Alloy Guard Delivers Greater Durability And Includes Blade Indication For Cut-Line Visibility
- Adjustable Wheel: Optimizes Blade Depth and Tool Angle For Maximum Control
- Mud Flaps: Prevents Dirt and Debris Kick-Back
- Skid Plate: Protects Gear Box From Concrete Contact
- Blade Size: 8"
- RPM: 3,900
- Length: 38"
- Weight: 5.25 lbs
View Details
|
T49162718 |
M18 Fuel Quik-Lok Edger Attachment |
1 |
Call for Price |
|
49-16-2718 |
|
|
M18 FUEL D-Handle Jig Saw Kit
The M18 FUEL D-Handle Jig Saw combines power, blade speed, and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, the M18 FUEL D-Handle Jig Saw provides higher blade speed than corded jig saws at 3500 strokes per minute, minimizing chipping or bucking for clean controlled cuts. With the M18 REDLITHIUM XC5.0 battery, the saw is capable of cutting up to 105 linear feet of 3/4" laminated particleboard, delivering all-day productivity with fewer trips to the charger. The M18 FUEL D-Handle Jig Saw features a variable-speed two-finger trigger, toolless blade-change and bevel adjust, and an integrated LED light with on/off blower to maximize cutline visibility.
INCLUDES:
(1) M18 FUEL D-Handle Jig Saw (Tool Only) (2737-20)
(1) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850)
(1) M18 & M12 Multi-Voltage Charger (48-59-1812)
(1) Anti-Splinter Guard
(1) Carry Case
(1) Dust Collection Tube
(1) Dust Cover
(1) General Purpose Jigsaw Blade
(1) Hex Wrench
(1) Shoe Guard
- POWERSTATE Brushless Motor: Increased SPM and the power to cut hard materials, including hardwoods and metals
- REDLINK PLUS Intelligence: the most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger
- REDLITHIUM battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
- Variable speed ranges between 0 and 3500 strokes per minute, providing precise control for clean cuts with less chipping
- 4-position orbital cutting provides versatility for application-specific cutting
- Toolless shoe bevel with positive stops allows for quick and accurate shoe adjustment with detents at 0, 15, 30 and 45 degrees
- On/Off cut line blower keeps the cut line clear of debris, and allows user to turn off blower when using dust extraction
- LED light illuminates the cut line
- Includes dust cover and dust extraction tube
- Includes non-marring shoe cover for protection of finished surfaces
- Accepts T-Shank jigsaw blades
View Details
|
T2737-21 |
M18 FUEL D-Handle Jig Saw Kit |
2 |
Call for Price |
|
2737-21 |
|
|
M18 FUEL 1-1/8” SDS Plus Rotary Hammer w/ DE Kit
Powered by FUEL technology, the M18 FUEL 1-1/8" SDS Plus Rotary Hammer delivers faster than corded speed, corded durability, and all day work on one charge. The Milwaukee POWERSTATE Brushless Motor provides 3.3 ft-lbs of impact energy, 0-1,350 RPM, and 0-5,000 BPM. The Milwaukee REDLITHIUM XC5.0 Battery Packs provide all day work on one charge, 20% more power, and 2X more life than standard Lithium-Ion batteries. REDLINK PLUS Intelligence integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging. Milwaukee(R) HAMMERVAC Dedicated Dust Extractor (2715-DE) delivers OSHA Table 1 Compliance and features an inline dedicated design engineered to connect directly to and be powered by either the M18 or M28 FUEL 1-1/8" SDS Plus Rotary Hammers (2715-22 or 0757-22). This design allows for a very compact HAMMERVAC and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filter 99.97% of all particles greater than 0.3um, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often.
INCLUDES:
M18 FUEL 1-1/8" SDS Plus Rotary Hammer (Tool Only) (2715-20)
M18 HAMMERVAC Dedicated Dust Extractor (2715-DE)
M18 & M12 Multi-Voltage Charger (48-59-1812)
M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850)
Side Handle
Carrying Case
HEPA Filter
Nozzles
Depth Rod
- FUEL Technology: Delivers faster than corded speed, corded durability, and all day work on one charge
- POWERSTATE Brushless Motor: Provides 3.3 ft-lbs of impact energy, 0-1,350 RPM and 0-5,000 BPM
- REDLITHIUM XC5.0 Battery Packs: Provide all day work on one charge, 20% more power and 2X more recharges than standard Lithium-Ion batteries. (Sold Separately)
- REDLINK PLUS Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
View Details
|
T2715-22DE |
M18 FUEL 1-1/8” SDS Plus Rotary Hammer w/ DE Kit |
1 |
Call for Price |
|
2715-22DE |
|
|
M18 Redlithium XC5.0 Starter Kit
The M18 Redlithium XC5.0 Starter Kit delivers up to 2.5X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance giving you more work per charge and more work over pack life than any battery on the market. The rechargeable battery also offers you 5.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0?F/-18?C. This protection routes water away from the electronics and out of the battery pack, extends your battery's run-time and life by minimizing heat, and prevents pack failures from vibration or drops. Built-in Redlink Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize your battery's life. Switch to the Redlithium XC5.0 Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools. In addition to the battery pack, the starter kit includes the M18 & M12 Battery Charger.
- REDLINK Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger
- Best-in-class construction: Offers long-lasting performance and durability
- Fuel gauge onboard: Displays remaining runtime for less downtime on the job
- All-weather performance: Delivers fade free power in extreme jobsite conditions
- Add any M18(TM) Tool-Only Option to Build Your Own Kit
View Details
|
T48591850 |
M18 Redlithium XC5.0 Starter Kit |
Out of stock |
Call for Price |
|
48-59-1850 |
|
|
OUTDOOR PLUG IN TIMER PHOTOCELL
Photoelectric Eye. Automates Outdoor Lighting For Convenience, Security And Safety With A Turn Of The Dial. Automatically On At Dusk And Off At Dawn Or Programmable On At Dusk And Off 2, 4, 6, Or 8 Hours Later. Settings Repeat Daily. Rugged, Weatherproof Housing And A 6" 18 Gauge Cord. 3 Conductor. 18/3 SJTW Cord - 120 Volt, 8.3 Amp, 1000 Watts Tungsten. CUL Listed.
- 24 Hour - Photoelectric
- Mechanical
- Color : Black
- Automatically On At Dusk And Off At Dawn Or Programmable On At Dusk And Off 2 4 6, Or 8 Hr Later
- Grounded Outlet, Weatherproof Housing, 6 In Power Cord
View Details
|
H18872 |
OUTDOOR PLUG IN TIMER PHOTOCELL |
1 |
Call for Price |
|
2001 |
|
|
24HR OUTDOOR TIMER HD MECH.
Automate Outdoor Security And Holiday Lighting, Bug Zappers And Pool Pumps. Up To 24 On/Off Settings Per Day, Repeats Daily. Programmable In 30 Minute Intervals. Pins Cannot Be Removed Or Lost. Manual Override Switch. CSA Certified C/US, CFL Compatible. Two Grounded Outlets, Weatherproof Housing, 12" Power Cord. Black With Forest Green Silkscreen And Cover. 3" Depth X 7.5" Width X 9" Height, .89 Lb. 125 Volts Ac, 60 Hz 15 Amps, 1875 Watts Resistive / 8 Amp, 1000 Watts Tungsten / 8 Amp Ballast. Controls Up To 3/4 HP, 15FLA, 90LRA.
- Mechanical - 24-Hour
- Heavy Duty
- Programmable In 30 Min Interval
- Up To 24 On Or Off Settings Per Day, Repeats Daily
- For Heavy Duty Appliances, Controls Up To 3/4 Hp, 15FLA
- Two Grounded Outlets, Weatherproof Housing, 12 In Power Cord
- Never Lose Pins Cannot Be Removed Or Lost
- Convenient Manual Override Switch
View Details
|
704346 |
24HR OUTDOOR TIMER HD MECH. |
1 |
Call for Price |
|
50012 |
|
|
M18 FUEL 1-1/8" SDS Plus Rotary Hammer Kit
Powered by FUEL technology, the M18 FUEL 1-1/8" SDS Plus Rotary Hammer delivers faster than corded speed, corded durability, and all day work on one charge. The Milwaukee POWERSTATE Brushless Motor provides 3.3 ft-lbs of impact energy, 0-1,350 RPM, and 0-5,000 BPM. The Milwaukee REDLITHIUM XC5.0 Battery Packs provide all day work on one charge, 20% more power, and 2X more life than standard Lithium-Ion batteries. REDLINK PLUS Intelligence integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging.
Milwaukee HAMMERVAC Dedicated Dust Extractor (2715-DE) features an inline dedicated design engineered to connect directly to and be powered by either the M18 or M28 FUEL 1-1/8" SDS Plus Rotary Hammers (2715-22 or 0757-22). This design allows for a very compact HAMMERVAC and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filter 99.97% of all particles greater than 0.3um, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often.
- Milwaukee POWERSTATE Brushless Motor provides more power, more run-time, and longer life.
- REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
- The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life.
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
- Inline Dedicated Design: Engineered to fit in the most confined workspaces.
- Replaceable Certified HEPA Filter: Filters 99.97% of all particles greater than 0.3 ?m.
- Adjustable Depth Stop and Ruler: Easily and precisely adjusts for accurate hole depths.
- High Capacity Dust Box: Allows user to work longer without emptying dust box as often.
- LED Light: Illuminates work area to increase visibility.
WHAT'S INCLUDED
(1) M18 FUEL 1-1/8" SDS Plus Rotary Hammer (Bare Tool) (2715-20)
(1) HAMMERVAC Dedicated Dust Extractor (2715-DE)
(2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850)
(1) M18 & M12 Multi-Voltage Charger (48-59-1812)
(1) HEPA Filter
(1) Nozzles
(1) Depth Rod
(1) Side Handle
(1) Carrying Case
View Details
|
T2715-22 |
M18 FUEL 1-1/8" SDS Plus Rotary Hammer Kit |
Discontinued |
Call for Price |
|
2715-22 |
|
|
M18 FUEL Metal Cutting Circular Saw Kit
The M18 FUEL 5-3/8" - 5-7/8" Metal Saw delivers the fastest cuts with the longest tool life and up to 370 cuts in 3/4" EMT. This compact and lightweight metal cutting saw utilizes a POWERSTATE Brushless Motor with 3,900 RPMs to deliver the fastest cutting speeds and longest tool life on the market. The metal saw also features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance and unmatched durability. The M18 REDLITHIUM XC5.0 Battery Pack delivers up to 370 cuts in 3/4" EMT which is 1 cut per minute for over 6 hours straight.The Milwaukee M18 FUEL 5-3/8" - 5-7/8" Metal Saw features a compact, low-profile design for easy handling and increased control. At only 5.9 lbs, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The new saw offers an integrated hang hook that allows for easy storage while the tool is not in use. The extra-large cut guide, impact resistant window and LED light ensure superior line of site and the stainless steel shoe reduces chip build-up to prevent surface marring. The 2782 M18 FUEL Metal Saw features a 30T Carbide-Tipped Metal Saw Blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by Milwaukee's 5-year warranty, the 2782-20 comes equipped with a 30T 5-3/8" METAL TECH Carbide-Tipped Metal Saw Blade and Blade Wrench.
INCLUDES:
(1) M18 FUEL Metal Cutting Circular Saw (Tool Only) (2782-20)
(2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850)
(1) M18 & M12 Multi-Voltage Charger (48-59-1812)
(1) Contractor Bag
(1) Allen Wrench
(1) 5-3/8" 30T Blade
- Milwaukee POWERSTATE Brushless Motor provides more power, more run-time, and longer life.
- The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life.
- REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
- Brushless motor with 3,900 RPMs delivers the fastest cutting metal cutting saw
- Brushless motor has no wearable components delivering longest tool life
- M18 REDLITHIUM Batteries (not included) deliver up to 370 cuts in 3/4" EMT for all day work
- Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
View Details
|
T2782-22 |
M18 FUEL Metal Cutting Circular Saw Kit |
1 |
Call for Price |
|
2782-22 |
|
|
18V LXT 4-Speed Impact Driver Kit (5.0Ah)
Makita has a legacy of innovation in the cordless impact driver category, and the XDT12T sets new standards. The XDT12T has more torque and more speed than previous models, yet it has more features and the most compact size in the 18 volt category. For contractors, the XDT12T is a total fastening solution.
The XDT12T offers users four speed settings, as well as Makita's exclusive Quick-Shift Mode for increased fastening control. Quick-Shift Mode uses the brushless motor's electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Another precision setting is Tightening Mode (T-mode), which downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work. In addition, the XDT12T features Assist Mode, which helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins. It is ideal for driving longer fasteners.
The Makita-built BL Brushless Motor delivers a full 1,550 in.lbs. of Max Torque in the 4th speed setting. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts. It weighs only 3.3 lbs. with the 5.0Ah battery, and with a length of only 4-5/8" it is the most compact in its category.
- Quick-Shift Mode uses the brushless motor's electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- BL Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max Torque - 4-speed power selection switch (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins
- Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
- Compact and ergonomic design at only 4-5/8" long
- Weighs only 3.3 lbs. with battery for reduced operator fatigue
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- All metal gear housing for increased job site durability
- 3-stage battery gauge indicates battery charge level
- Convenient one-touch 1/4" hex chuck for quick bit changes
- Built-in dual L.E.D. lights illuminate the work area
- Rubberized soft grip provides increased comfort on the job
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B features an integrated L.E.D. battery charge level indicator
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge*
- 18V LXT Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year warranty on tool, battery and charger
View Details
|
TXDT12T |
18V LXT 4-Speed Impact Driver Kit (5.0Ah) |
1 |
Call for Price |
|
XDT12T |
|
|
M18 Jobsite Radio/Charger
The Milwaukee M18 Jobsite Radio/Charger is the first charging radio to bring the power of Bluetooth to the jobsite, while delivering the industry's best reception and sound. The most advanced radio of its kind, the M18 Jobsite Radio/Charger features a Bluetooth receiver so you can stream rich, full sound wirelessly from over 100 feet away. Its unique battery charger allows you to charge any M18 battery without sacrificing reception or sound quality.
For added versatility, a high-power USB port allows you to charge most portable electronic devices over 50% faster than any competitor. The M18 Radio/Charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions. The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones. A 16" auxiliary input cord and 2 AAA batteries are included.
- Built-In Charger: Quick, convenient charging of all M18 batteries
- Exclusive Digital Bluetooth Receiver: Streams audio wirelessly from over 100 feet away
- USB Power Port: 50% faster device charging, plugged in or on the go
- Premium Speakers and 40-Watt Amplifier: Produce a rich, full sound
- Customizable Equalizer and 10-Station Preset: Delivers personalized, enhanced sound
- Reinforced Roll Cage and Metal Handles: Protects against abusive jobsite conditions
- Weather-Sealed Compartment: Offers on-board protection for small belongings and a smart phone
- On-Board Bottle Opener: For convenience on and off the jobsite
View Details
|
T2792-20 |
M18 Jobsite Radio/Charger |
2 |
Call for Price |
|
2792-20 |
|
|
18V LXT Lithium-Ion 5.0Ah Battery, Twin Pack
The Makita 18V LXT Lithium-Ion battery charges faster and works longer than standard lithium-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications. The Makita 5.0Ah battery has a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger.
The 18V LXT 5.0Ah battery is compatible only with Star Protection tools, indicated by the Star Symbol and/or Yellow Battery Receiver under the tool.
Makita 18V Lithium-Ion batteries resist self-discharge so they're ready for use even after long periods of storage. The Makita Rapid Optimum Charger (sold separately) is a smart-charging system that communicates with the battery during the charging process to monitor current, voltage and temperature. This advanced charging technology helps optimize battery life and deliver a faster charge. In addition, the Charger has a built-in fan to cool the battery for faster and more efficient charging, even in hot weather conditions.
For improved tool performance and extended battery life, Makita created STAR Protection Computer Controls. STAR Protection is communication technology that allows the tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. Makita, the innovation leader in cordless tool technology, has the world's largest cordless tool system powered by 18V lithium-ion slide-style batteries.
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with Star Protection tools, indicated by the Star Symbol and/or Yellow Battery Receiver under the tool
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-4 F/-20 C)
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Makita 18V Lithium-Ion is the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (charger not included)
- 3-year limited warranty
View Details
|
TBL1850B-2 |
18V LXT Lithium-Ion 5.0Ah Battery, Twin Pack |
7 |
Call for Price |
|
BL1850B-2 |
|
