|
M18 FUEL 10" Pole Saw Kit w/ QUIK-LOK Attachment
Designed to meet the needs of landscape maintenance professionals, The M18 FUEL 100 Pole Saw w/ QUIK-LOK kit gives you the power to cut hardwood branches, reaches full throttle in under 1 second, and delivers up to 150 cuts per charge. The cordless pole saw is made up of two components -- the M18 FUEL Power Head w/ QUIK-LOK and QUIK-LOK 100 Pole Saw Attachment. This M18 FUEL Power Head, part of the M18 FUEL QUIK-LOK Attachment System, is compatible with multiple attachments such as an Edger, Articulating Hedge Trimmer, and String Trimmer attachment. This gives you the ability to quickly swap out attachments on a single Power Head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE Brushless Motor gives you the power to maintain its speed in demanding applications without bogging down, outperforming higher voltage systems. The Motor is positioned in the rear of the pole saw to provide the best combination of power, balance, and maneuverability. REDLINK PLUS intelligence gives you maximum performance and protection from overload, overheating and over-discharge. The advanced electronic package also delivers instant throttle response and a variable speed trigger giving you ultimate control over the power range. The M18 REDLITHIUM HIGH OUTPUT XC8.0 Battery gives you the best in class performance in all applications and delivers up to 150 cuts per charge. The M18 FUEL 100 Pole Saw w/ QUIK-LOK is part of the M18 system which is fully compatible with over 200 tools. In addition to the cordless pole saw, the kit includes a 30 Attachment Extension, Shoulder Strap, one of the M18 REDLITHIUM HIGH OUTPUT XC8.0 Batteries and an M18/M12 Rapid Charger. INCLUDES:
(1) M18 FUEL QUIK-LOK 100 Pole Saw Attachment (49-16-2720)
(1) M18 FUEL QUIK-LOK 30 Attachment Extension (49-16-2721)
(1) Shoulder Strap (49-16-2722)
(1) M18 REDLITHIUM HIGH OUTPUT XC8.0 Battery (48-11-1880)
(1) M18 & M12 Rapid Charger (48-59-1808)
(1) Oregon Bar and Chain
(1) Scrench
- POWERSTATE Brushless Motor: Purposely built for the M18 FUEL Power Head w/ QUIK-LOK to generate the power and performance of high voltage platforms
- REDLINK PLUS Intelligence: Optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18 System.
- M18 REDLITHIUM HIGH OUTPUT XC8.0 Battery Pack: Provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC Battery Packs
- RPM: 0-4600
- Bar Length: 100
- Chain Gauge: .0430
- Chain Pitch: 3/80 Low Profile
View Details
|
T2825-21PS |
M18 FUEL 10" Pole Saw Kit w/ QUIK-LOK Attachment |
1 |
Call for Price |
|
2825-21PS |
|
|
M12 FUEL Stubby 1/2" Impact Wrench Kit
The M12 FUEL 1/2" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.9" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLIINK tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work.
INCLUDES:
M12 FUEL 1/2" Stubby Impact Wrench (2555-20)
M12 REDLITHIUM CP2.0 Battery (48-11-2420)
M12 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48-11-2440)
M12 Lithium-ion Battery Charger (48-59-2401)
Belt Clip
Carrying Case
- Most Compact. Greatest access in tight spaces at 4.9" in length
- Up to 250 ft.-lbs. of nut-busting torque
- 4-Mode Drive control
- Auto-Shut Off mode reduces over fastening and increases productivity
- POWERSTATE Brushless Motor provides more power, more run-time, and longer life.
- REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
- REDLITHIUM batteries (not included) deliver more work per charge and more work over the life of the battery
View Details
|
T2555-22 |
M12 FUEL Stubby 1/2" Impact Wrench Kit |
1 |
Call for Price |
|
2555-22 |
|
|
M12 FUEL 3/8" Stubby Impact Wrench Kit
The M12 FUEL 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. The cordless impact wrench features built-in REDLINK tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work.
INCLUDES:
(1) M12 FUEL 3/8" Stubby Impact Wrench (2554-20)
(1) M12 REDLITHIUM CP2.0 Battery (48-11-2420)
(1) M12 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48-11-2440)
(1) M12 Lithium-ion Battery Charger (48-59-2401)
(1) Belt Clip
(1) Carrying Case
- Most Compact. Greatest access in tight spaces at 4.8" in length
- Up to 250 ft.-lbs. of nut-busting torque
- 4-Mode Drive control
- Auto-Shut Off mode reduces over fastening and increases productivity
- POWERSTATE Brushless Motor provides more power, more run-time, and longer life.
- REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
- REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
View Details
|
T2554-22 |
M12 FUEL 3/8" Stubby Impact Wrench Kit |
2 |
Call for Price |
|
2554-22 |
|
|
FC 56 C-E EDGER
Give your home that professionally landscaped look with the STIHL FC 56 C-E edger. With its fuel-efficient, low-emission STIHL engine, this edger powers through curbside annoyances like overgrown grass, thick weeds and compacted soil. And thanks to its semi-automatic choke lever and Easy2Start system, starting the edger is easy -- gently pull the cord and start defining your outdoor spaces. Its adjustable depth wheel even lets you select different cutting depths, so you can give your walkways, driveways and areas of your property the perfect amount of definition.
- Built in the USA
- Reduced-Emission Engine Technology - Caring for Nature
- Skid Plate
- Adjustable Depth Wheel
- Easy2Start System
- Stop Switch
View Details
|
TFC56CE |
FC 56 C-E EDGER |
2 |
Call for Price |
|
41440111908US |
|
|
KM 56 RC-E KOMBISYSTEM LOOP HAND
Versatile doesn't even begin to describe the capability packed into the KM 56 RC-E KombiMotor. This multi-tasking tool features a low-emission STIHL engine that delivers both power and fuel efficiency. The KM 56 RC-E and its optional STIHL KombiSystem attachments are great for a wide range of jobs around the yard, from trimming and cutting, to edging and clearing. And thanks to its Easy2Start system, the only thing standing between you and your day is an easy pull of the starter cord.
The STIHL KombiSystem is a family of multi-task tools, comprised of a STIHL KombiMotor and a comprehensive line of attachments. This line includes trimmers, blowers, hedge trimmers, edgers, pruners, cultivators and more. Each attachment slides into the KombiMotor effortlessly and is secured via a quick-release coupling system. The KombiSystem offers great power and flexibility for space-conscious homeowners.
- 13 optional attachments available
- Built in the USA
- Reduced-Emission Engine Technology - Caring for Nature
- STIHL Easy2Start
- Quick-Release Coupling
- Split Shaft
- Electronic Ignition Module
- Multi-Function Control Handle
- Purge Pump Primer
View Details
|
TKM56RCE |
KM 56 RC-E KOMBISYSTEM LOOP HAND |
2 |
Call for Price |
|
41442000017US |
|
|
WET/DRY VAC 16 GALLON 6.5HP
Vac Is Full Featured Wet/Dry Vac With 18 Foot Power Cord, Inlet Accepts 1.25", 2.5" And 3.5" Hoses. SVX2 Motor Technology. Has More Power And Longer Motor Life. Includes; 8' X 2.5" LockOn Hose, (2)-2.5" Extension Wands, 14" Wet Dry Floor Nozzle, 8" Utility Nozzle, 2.5" Crevice Tool, Elbow Grip, Accessory Tool Bag; Disposable Filter Bag, ProLong Cartridge Filter.
- 6.5 Peak HP
- Cap Gal : 16
View Details
|
H96216 |
WET/DRY VAC 16 GALLON 6.5HP |
Discontinued |
Call for Price |
|
8252600 |
|
|
25' 16/3 ORANGE VINYL WORK LIGHT
Patented Dual Hook System, Hang By The Guard Or Handle. Heat Resistant Housing Stays Cool Even With Short Neck Bulbs. Round Flexible Vinyl Jacket. Meets OSHA Specifications For Temporary Lighting. UL Rated For 75 Watt Maximum Bulbs. UL Listed. Orange Cord. Sleeved.
- Grounded Outlet
- Metal Grounded Guard
- 3 Conductor - With Switch
- 16/3 SJT - With Outlet
- Cord Lgth Ft : 25
- Amp/ Volt : 12/125
- Round Orange Vinyl Jacket Is Flexible, Easy To See And Won't Mark Floors Or Walls
- Constructed From Tough PVC Yet Lightweight Construction Makes Handling Effortless
- Dual Hook System Which Permits Hanging The Work Light By Either The Guard Or Handle
- Standard With Power Switches And Bulb Cages For Fast Light Bulb Changes
View Details
|
70691 |
25' 16/3 ORANGE VINYL WORK LIGHT |
1 |
Call for Price |
|
0691 |
|
|
BRASS DROP-IN FLOOR BOX KIT
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
- Drop-In - Brass Cover
- Includes: Non-Metallic Box, Cover, Power Receptacle, Low-Voltage Insert, Blank Insert, Mounting Screws, Wire Nuts, Optional Hole Saw
- Eliminates extension cords running across the floor from wall outlets
- Pre-wired 15 A single receptacle with three pigtail leads
- Solid brass or aluminum cover with brushed and lacquered finish for durability
- Low-voltage insert accepts two keystone devices
- Integral cable clamp for non-metallic sheathed cable
View Details
|
740030 |
BRASS DROP-IN FLOOR BOX KIT |
1 |
Call for Price |
|
E971FBDI-2 |
|
|
M18 ROCKET Tower Light/Charger (Tool Only)
The M18 ROCKET Tower Light/Charger is designed to deliver you a lighting solution that adapts, performs, and survives to the jobsite. This light tower sets up in seconds to a max height of 7' and collapses to less than 4' for easy transportation and storage. The LED light head can be extended from 4-7' to light overhead work or minimize shadows when casting shine downward. The multidirectional light head allows you to orient the three independently pivoting light heads to cast light in several directions. With an integrated AC plug, you can plug in the light with a standard extension cord and charge any M18 REDLITHIUM pack. Delivering 3,000 lumens, it fills up large areas with TRUEVIEW High Definition light. For optimized control over the output and run-time, the M18 ROCKET LED Light has three output settings. The LEDs never need to be replaced and are backed by a limited lifetime warranty. MILWAUKEE ROCKET Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.
- 3,000 Lumens of TRUEVIEW High Definition Output
- TRUEVIEW High Definition Output provides neutral white color and produces an even beam pattern for clearer visibility
- 5 Second Setup, 7 Foot Extension.
- IPX4 Rated: Water Resistant
- Impact Resistant, Reinforced Legs
- Built in M18 Charger
- Powered by M18 REDLITHIUM Battery or Extension Cord
- Three Independently Pivoting Light Heads
- Protective Guard to Secure head and lens during transport and storage
- Compact Footprint, Low Center of Gravity
- Low Battery Indicator
- LED Limited Lifetime Warranty: LEDs never need to be replaced
View Details
|
T2135-20 |
M18 ROCKET Tower Light/Charger (Tool Only) |
Discontinued |
Call for Price |
|
2135-20 |
|
|
M18 Brushless Threaded Rod Cutter Kit
The M18 Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18 REDLITHIUM 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all-thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18 REDLITHIUM 2.0Ah Battery, a multi-voltage charger, and a carrying case.
- Delivers Clean, Burr-Free Cuts for Threading Nuts on by Hand
- Powers through 1/2" Mild Steel & 3/8" Stainless Steel Threaded Rod in Seconds
- Centered Grip Optimized for One-Handed Overhead Operation
- Improved Cutting, No Chips or Sparks
- Cuts 1/4", 3/8" & 1/2" Mild Steel, 1/4" & 3/8" Stainless Steel, Coarse Threaded Rod
- Brushless Motor provides more power, more run-time, and longer life
- Flat Horizontal Position for Benchtop Use
- Clearest Line of Sight While Making Overhead Cuts
- 1-1/2" Trim Length Delivers Even, Uniform Cuts Every Time
- Auto Jaw Opening for Fast, Repetitive Cuts
- Four-Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool
- Reverse Button for Unintended Cuts
- LED Light Illuminates Cut Area
- Easy Die Changes Using Allen Key Stored On Tool
- Delivers 400+ Cuts on 3/8" Mild Steel Per Charge with a M18 2.0Ah Battery
View Details
|
T2872-21 |
M18 Brushless Threaded Rod Cutter Kit |
1 |
Call for Price |
|
2872-21 |
|
|
M18 & M12 Multi-Voltage Charger
Always be ready for your next job with this cross-system charger. The M18 & M12 Multi-Voltage Charger accepts all M18 and M12 batteries, so you'll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
- Single unit simplicity: Quickly charges all M12 and M18 Battery Packs
- Reduces time to manage charge cycles by sequentially charging the battery packs - Charge management: Charger communicates with the battery pack to ensure a full charge and battery protection
View Details
|
T48591812 |
M18 & M12 Multi-Voltage Charger |
2 |
Call for Price |
|
48-59-1812 |
|
|
BATTERY PACK 7.2 VOLT HITACHI
For use in Hitachi gas nailers.
- 7.2 Volt-NiCD
- Battery made with nickel cadmium which charges quickly and is an affordable battery option for cordless power tools
- Battery has a Hitachi model number of EB714S and can be charged using many of Hitachi's battery chargers for flexibility
- Post type battery to be used in conjunction with the Hitachi NR90GR2 (Depot 202715755)
- Consistent discharge rates with considerable power
View Details
|
N325292 |
BATTERY PACK 7.2 VOLT HITACHI |
1 |
Call for Price |
|
|
|
|
M18 FUEL 3-in-1 Backpack Vacuum
Whether taking on spot, area, or final cleanups, the Milwaukee M18 FUEL 3-in-1 Backpack Vacuum brings unmatched cordless performance, portability, and versatility to the jobsite. The POWERSTATE Brushless Motor and cyclonic design deliver up to 2X more suction power than traditional jobsite vacs, allowing users to efficiently tackle common jobsite debris like drywall dust, concrete dust, and wood/metal shavings. A removable harness, integrated canister hook and handle allow users to wear, hang, and carry the product for ultimate adaptability. Standard accessories include a flexible hose, telescoping extension wand, floor tool, crevice tool, HEPA filter, and dust extraction adapter. At only 76 dB(A), the vacuum is up to 3X quieter than traditional vacs, providing comfortable operation on any jobsite, including occupied spaces.
- POWERSTATE Brushless Motor: Long life, quiet operation, and up to 2X suction compared to traditional job site vacs
- REDLINK PLUS Intelligence: Ensures optimal performance and maintains compatibility across the entire M18 System
- OSHA Compliance Solution: Objective data complaint dust management solution for specific applications and durations to meet Occupational Health & Safety Administration (OSHA) regulation on respirable crystalline silica dust.
- Cyclonic Technology: Powerful suction, long filter life, and easy-empty bag less debris collection
- Removable harness, integrated canister hook and handle for max
versatility
- On-board storage for flexible hose, telescoping extension wand, floor tool, and crevice tool
- Certified HEPA filter
- High / Low switch
- 1-gallon debris collection capacity
- Dry vacuum
- Compatible with all M18 batteries
View Details
|
T0885-21HD |
M18 FUEL 3-in-1 Backpack Vacuum |
1 |
Call for Price |
|
0885-21HD |
|
|
M18 FUEL 7-1/4" Circular Saw
Designed for the carpenter, remodeler and general contractor, the M18 FUEL 7-1/4" Circular Saw from Milwaukee delivers the power of a 15A corded saw, cuts faster than a 15A corded saw and gives users up to 750 cuts per charge. The POWERSTATE Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT HD12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.
View Details
|
T2732-20 |
M18 FUEL 7-1/4" Circular Saw |
1 |
Call for Price |
|
2732-20 |
|
|
Forney 210 MIG Welder
The Forney 210 MIG welder is a versatile machine for farms, automotive, boats, general fabrication and repair welding. This machine is MIG ready with regulator and gas hose. The Forney 210 MIG is a new machine For Forney and offers quality features like spool gun capability, quick disconnect torch, 10' gun/torch, aluminum feed/drive system, cable wrap, versatile despooler and large cabinet with easy spool access. The quality, performance, and value of this machine will impress.
- Quick-connect MIG gun with Tweco compatible consumables
- Long 10' (3.05m) MIG gun/torch
- Long 15' (4.57m) power cord
- Spool gun ready
- Integrated cable wrap
- Aluminum wire feeder and drive system
- Quality and adaptable spool holder/retainer
- Standard U.S. gas hose set-up
- Flowmeter and gas hose included
- Quality metal cabinet with no assembly required, improved spool access and more space inside, and fold up door
- Full graphics box, quick-start guide, and owner's manual
- Height: 16" (406 mm)
- Width: 10-1/4" (260 mm)
- Length: 20-1/4" (514 mm)
- Weight: 78 lbs. (35.4 Kg)
View Details
|
T311 |
Forney 210 MIG Welder |
1 |
Call for Price |
|
311 |
|
