|
9" Finish Nail Puller
The 9" Finish Nail Puller is equipped with the Smoothpull high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard to reach nails The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 6D-12D nail slots, deliver increased efficiency on the job site.
- SMOOTHPULL high leverage head for quick nail removal
- Wear-resistant grip
- Beveled edge nail slots for better access
- Optimized 6D-12D nail slots
- Low profile claw that reduces damage to surrounding materials
- Nail removal feature to access hard to reach nails
- Reduced vibration with SHOCKSHIELD grip
- Precision claws with long-lasting sharpness
- Corrosion resistant
- Limited lifetime warranty
View Details
|
T48229030 |
9" Finish Nail Puller |
1 |
Call for Price |
|
48-22-9030 |
|
|
DAMITIE POWDER WATERPROOFER 45LB
Portland-Cement Base Coating. Holds Back 22psi Of Hydrostatic Pressure. Safe For Drinking Water Cisterns. Seals, Protects And Beautifies Vertical Walls Constructed Of Concrete, Masonry, Brick Or Stucco. Eliminates Dampness And Resists Mildew, Flaking Or Chalking While Sealing All Pores And Voids. Helps Reduce Radon Gas Penetration Through Concrete Block Walls. Just Add Water To Powder And Mix; Brushes On Like Paint. Mix With Damtite Bonding Additive In Place Of Water For Previously-Painted Or Non-Porous Surfaces (Poured Concrete). Coverage (Varies By Porosity Of Surface And By First Or Second Coat): 7lb To 93 Sq Ft (8.6 M2); 21lb To 280 Sq Ft (26 M2); 45lb To 600 Sf (55.7 M2).
- Step 3 Decorate & Waterproof Option
- White
- Size Lb : 45
- Economical, Just Add Water And Mix
- Safe For Drinking Water Tanks And Cisterns
- Apply To Wet Or Dry Walls
- For Basement And Garage Walls, Retaining And Sea Walls
- For Bird Baths, Fountains, Fish Ponds, Planters And Bare Concrete Swimming Pools, Foundations -- Above And Below Grade
- For Unventilated Crawl Spaces And Cellars, Concrete Silos And Tornado Shelters, Reducing Radon Gas Penetration
- Breathable Film; No Moisture Trapped In Wall
- For Interior Or Exterior, Above Or Below Grade
View Details
|
M8200404 |
DAMITIE POWDER WATERPROOFER 45LB |
1 |
Call for Price |
|
01451 |
|
|
ImpactX 50 Pc. Driver Bit Set
ImpactX is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional contractor. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners, and in applications with high torque impact drivers this losing combo quickly leads to broken bits. ImpactX hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
- Precision machined tips with superior fitment for full contact fit and longer life
- Performance-optimized S2 steel construction for extended life
- Calibrated heat treating process for added durability
- Manganese Phosphate surface for advanced corrosion resistance
- Optimal geometry for an ideal fit and improved holding power
- Engineered to withstand the extreme power of high-torque impact drivers
- Ideal for driving screws in a variety of heavy duty applications including metal fastening, deck - building, framing, and installing plywood subfloor
- For use with high torque impact drivers and driver-drills
- Xpand Storage System is removable and holds up to 50 extra 1" insert bits - Bit keepers rotate up to 90-degrees for easy bit removal
- Retention loop for convenient storage and organization
View Details
|
TA98348 |
ImpactX 50 Pc. Driver Bit Set |
Discontinued |
Call for Price |
|
A-98348 |
|
|
DREMEL 150PC ACCESSORY KIT
Versatile And Reusable Accessory Kit Includes Everything You Need To Cut, Grind, Sand, Polish, Drill, Sharpen And Clean. Includes: 1-1/4" Cut Off Wheel, 3/4" Carbon Steel Brush, Polishing Compound, (4)-Four-1" Felt Polishing Wheel, Silicon Carbide Grinding Stone, High Speed Cutter, 1/2"/60 Grit Sanding Drum With Mandrel, 1/4"/60 Grit Sanding Band With Mandrel, Mandrel, Wrench, Aluminum Oxide Grinding Stone, Silicon Carbide Grinding Stone, Aluminum Oxide Grinding Stone, (12)-Twelve-15/16" Emery Cut Off Wheel, (12)-Twelve-15/16" Heavy Duty Emery .-Cut Off Wheel, 1-1/4" Fiberglass Reinforced Cut Off Wheel, (4)-Four-Small Felt Wheel, Cone Polishing Tip, (6)-Six-1/2"/60 Grit Sanding Band, (12)-Twelve- 3/4" 180 Grit Sanding Disc, (12)-Twelve- 3/4"/220 Grit Sanding Disc, (12)-Twelve- 3/4"/.240 Grit Sanding Disc, (6)-Six-1/4"/60 Grit Sanding Band, (6)-Six-1/2"/120 Grit Sanding Band, (6)-Six- 1/4"/ 120 Grit Sanding Band, Mandrel, Dressing Stone, Bristle Brush And 180 Grit Abrasive Buff.
- This Versatile And Re-Usable Accessory Kit Includes Everything You Need To Cut, Grind, Sand, Polish, Drill, Sharpen, Clean And More
- Re-Usable Hard Case Storage
- Case Converts To Bin Storage
- Case Fits XPR Tool Kits
View Details
|
T69706 |
DREMEL 150PC ACCESSORY KIT |
1 |
Call for Price |
|
709-02 |
|
|
7pc Combination Wrench Set - Metric
Milwaukee has designed the Combination Wrenches from the ground up, delivering maximum torque and ultimate user comfort. The Max Bite Open-End Grip improves the wrench's grip on nuts and bolts, and the geometry reduces rounding and stripping. Max Bite offers 25% More Torque than competitive wrench designs. The Comfortable I-Beam Handle Design allows superior user comfort, even while applying high torque. Milwaukee wrenches feature Ink-Filled Size Labels for easy size identification, and quick distinction between SAE and metric sets. The 7pc kits come in a portable, locking storage tray, offering organization both on and off the jobsite.
- MAX BITE Open-End Grip
- 25% More Torque
- Comfortable I-Beam Handle Design
- Ink-filled Size Labels
- Organized Storage Solution
- Lifetime Guarantee
View Details
|
T48229507 |
7pc Combination Wrench Set - Metric |
6 |
Call for Price |
|
48-22-9507 |
|
|
7pc Combination Wrench Set - SAE
Milwaukee has designed the Combination Wrenches from the ground up, delivering maximum torque and ultimate user comfort. The Max Bite Open-End Grip improves the wrench's grip on nuts and bolts, and the geometry reduces rounding and stripping. Max Bite offers 25% More Torque than competitive wrench designs. The Comfortable I-Beam Handle Design allows superior user comfort, even while applying high torque. Milwaukee wrenches feature Ink-Filled Size Labels for easy size identification, and quick distinction between SAE and metric sets. The 7pc kits come in a portable, locking storage tray, offering organization both on and off the jobsite.
- MAX BITE Open-End Grip
- 25% More Torque
- Comfortable I-Beam Handle Design
- Ink-filled Size Labels
- Organized Storage Solution
- Lifetime Guarantee
View Details
|
T48229407 |
7pc Combination Wrench Set - SAE |
4 |
Call for Price |
|
48-22-9407 |
|
|
Packout Tool Box
Part of the industry's most versatile and most durable modular storage system, the Milwaukee Packout tool box is constructed with impact resistant polymers and metal reinforced corners to provide up to 75lbs of weight capacity and ultimate durability in harsh jobsite conditions. Featuring an IP65 rated weather seal to keep out rain and jobsite debris, and integrated organizers bins, the Milwaukee Packout tool box is fully compatible with all Milwaukee Packout modular storage products.
- IP65 Rated Weather Seal
- Metal Reinforced Corners
- Metal Reinforced Locking Point
- Interior Organizer Trays
- Mounting Location for the ONE-KEY TICK
- Heavy Duty Latches
- Reinforced Hinge
- Exterior Dimensions - 22.1"W x 16.2" D x 6.5" H
- Interior Dimensions - 19.7" W x 13.2" D x 4.5" H
- Modular Connectivity with ALL PACKOUT Components
View Details
|
T48228424 |
Packout Tool Box |
1 |
Call for Price |
|
48-22-8424 |
|
|
4PK Inkzall Color Fine Point Marker
Inkzall Jobsite Markers feature clog resistant tips and the ability to write through dusty, wet or oily surfaces. The durable marker tips are designed for writing on rough surfaces such as OSB, cinderblock and concrete and the ink dries quickly to reduce smearing markings, without drying out quickly when the cap is left off. For added user convenience, the Inkzall markers have a built-in hard hat clip for easy storage and access. Inkzall markers confirm Milwaukee's commitment to best-in-class durability and their relentless mission to provide innovative solutions to the end user.
- Weight: .03 lbs
- Length: 5.5"
- Warranty: Limited Lifetime Warranty
- Color: Multi-Color
- Pack Qty: 4
- Clog Resistant Marker Tip
- Writes through Dusty, Wet and Oily Surfaces
- Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces
- Built-In Hard Hat Storage Clip
View Details
|
T48223106 |
4PK Inkzall Color Fine Point Marker |
9 |
Call for Price |
|
48-22-3106 |
|
|
INKZALL FINE POINT MARKER
INKZALL Jobsite Markers feature clog resistant tips and the ability to write through dusty, wet or oily surfaces. The durable marker tips are designed for writing on rough surfaces such as OSB, cinder block and concrete and the ink dries quickly to reduce smearing markings, without drying out quickly when the cap is left off. For added user convenience, the INKZALL markers have a built-in hard hat clip for easy storage and access. INKZALL markers confirm to Milwaukee's commitment to best-in-class durability and their relentless mission to provide innovative solutions to the end user.
- Clog Resistant Marker Tip
- Writes through Dusty, Wet and Oily Surfaces
- Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces
- Built-In Hard Hat Storage Clip
- Fine Point
- Ink Dries in Seconds
- Lanyard Hole
- Anti-Roll Body Design
- Non-Toxic Ink
View Details
|
T48223100 |
INKZALL FINE POINT MARKER |
Discontinued |
Call for Price |
|
48-22-3100 |
|
|
SDS PLUS DUST TRAP Drilling Shroud 10 Pack
The Milwaukee SDS Plus DUST TRAP is the industry's first OSHA compliance solution without a vacuum, ideal for overhead drilling applications. The universal fit allows the DUST TRAP to work with all SDS Plus rotary hammers and SDS Plus drill bits up to an 8" length, including stop bits and other anchor installation tools. The clear sleeve allows visibility while the locking mechanism enables easy storage on the jobsite. The compact, collapsible design is ideal for tough to reach places, providing superior productivity. The DUST TRAP is OSHA objective data compliance solution when used without a vacuum and OSHA Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant. Replacement SDS+ DUST TRAP Sleeves are available (48-03-3235).
- OSHA Compliance without a Vacuum
- Universal Fit for SDS-Plus Rotary Hammers
- Clear sleeve for maximum visibility and accuracy
- OSHA(R) Objective Data compliance without a dust extractor
- OSHA(R) Table 1 compliant with a dust extractor
- Fits SDS Plus drill bits up to 8" overall length and works with stop bits
- Compact, collapsible design ideal for accessibility and storage
View Details
|
T48033135 |
SDS PLUS DUST TRAP Drilling Shroud 10 Pack |
10 |
Call for Price |
|
48-03-3135 |
|
|
18V TWO SPEED DRILL DRIVER
Variable speed trigger controls users drilling speed. 2-speed gear box for high speed drilling and high torque applications. Matches driving power to specific applications and prevents screw stripping. Batteries included delivers double the run time. Specs: 0-400/0-1,250 no load rpm, 25+1 clutch settings, on-tool bit storage and weighs 4.5 lbs with battery. Includes two batteries, charger, double-ended bit and carrying case.
- 1/2 Inch - 18 Volt - VS
- Keyless
- 25+1 clutch settings matches driving power to your specific application and prevents screw stripping
- Variable speed trigger lets you control your drilling speed when precision matters most
- 2 batteries included, delivers double the run time
- 1/2 in keyless chuck to accept a wide variety of bits and accessories
- On-tool bit storage for convenience
- Powerful 2-speed gearbox for high speed drilling and high torque applications
View Details
|
T288705 |
18V TWO SPEED DRILL DRIVER |
1 |
Call for Price |
|
2888-03 |
|
|
M18 FUEL 8-1/4" Table Saw w/ One-Key Kit
The Milwaukee M18 FUEL 8-1/40 Table Saw w/ One-Key generates the power of a 15A Corded Saw, 24-1/2" of Rip Capacity and Up to 600 linear Feet of cutting per charge. Designed for the professional carpenter, remodeler and general contractor, the Milwaukee M18 FUEL 8-1/4" Table Saw w/ One-Key is optimized for power, portability, and productivity. The POWERSTATE Brushless Motor provides 6,300 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The M18 REDLITHIUM HIGH OUTPUT HD12.0 battery delivers unmatch run-time in all applications. The rack and pinion fence system maintains accuracy and allows for quick adjustments. For maximum productivity, the tool has onboard storage for the included accessory and a tool free guard and riving knife changes. An all-metal frame provides durability for daily jobsite use. Compatible with ONE-KEY, this is the industry0s first Table Saw that wirelessly connects to a smart phone to Track and manage a tool0s performance and location. Integrated Tool Tracking, available through ONE-KEY, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. Paired with tracking, Integrated Tool Security provides the ultimate theft protection. Protect your investment with features like tool lock-out, or hide tool from the nearby devices screen so only you can see your tool is in range. If your tool is lost or stolen, render it useless by sending a remote command to the tool to shut itself off the next time it comes within range of any ONE-KEY app.
INCLUDES:
(1) M18 REDLITHIUM HIGH OUTPUT HD12.0 Battery Pack (48-11-1812)
(1) M18 & M12 Rapid Charger (48-59-1808)
(1) Anti Kick Back Pawls
(1) Blade
(1) Blade Wrench
(1) Guard
(1) Miter Gauge
(1) Riving Knife
- POWERSTATE Brushless Motor: Purposely built for the M18 FUEL 8-1/4" Table Saw w/ One-Key to provide the power and performance of a 15A corded table saw.
- REDLINK PLUS Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
- REDLITHIUM HIGH OUTPUT HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM HD packs. Superior pack construction provides the industry's best protection against job site conditions.
- 24-1/2" Rip Capacity to rip 4x8 sheets of plywood or OSB
- Rack and Pinion Fence System for square cuts and easy adjustment
- All metal frame to handle tough job site conditions
- Onboard storage for guard, riving knife, push stick, fence and miter
gauge
- Tool-free guard and riving knife changes
- Single wrench blade change
View Details
|
T2736-21HD |
M18 FUEL 8-1/4" Table Saw w/ One-Key Kit |
2 |
Call for Price |
|
2736-21HD |
|
|
M18 FUEL 7-1/4" Circular Saw Kit
Designed for the carpenter, remodeler and general contractor, the M18 FUEL 7-1/40 Circular Saw from Milwaukee generates 15A corded power, cuts faster than a 15A corded saw and gives users up to 750 cuts per charge. The POWERSTATE Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT HD12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.
INCLUDES:
(1) M18 REDLITHIUM HIGH OUTPUT HD12.0 Battery Pack (48-11-1812)
(1) M18 & M12 Rapid Charger (48-59-1808)
(1) Blade
(1) Blade Wrench
(1) Contractor Bag
- POWERSTATE Brushless Motor: Purposely built for the M18 FUEL 7-1/4" Circular Saw to provide the power and performance of a 15A corded circular saw.
- REDLINK PLUS Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
- REDLITHIUM HIGH OUTPUT HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM HD packs. Superior pack construction provides the industry's best protection against jobsite conditions.
- Magnesium shoe and guards for maximum durability
- Integrated rafter hook for easy storage
- LED light for increased accuracy and visibility
- Integrated dust port on guard and included vac adaptor
- Electric brake to stop blade after trigger is released
- 2-1/2" Cut Depth
View Details
|
T2732-21HD |
M18 FUEL 7-1/4" Circular Saw Kit |
Out of stock |
Call for Price |
|
2732-21HD |
|
|
12" TOOLBOX WITH TRAY
Two Lid Organizers For Small Parts Storage - Accessible Without Opening The Tool Box; Built-In Pad Lock Eye For Small Locks - Keeps Contents Secure; Soft, Wide Rubber Coated Handle Allows For Easy And Comfortable Grip; Tote Tray Inside To Store Smaller Items.
- Lgth In : 12-1/2
- Two Lid Organizers For Small Parts Storage -- Accessible Without Opening The Toolbox
- Built-In Pad Lock Eye For Small Locks -- Keeps Contents Secure
- Soft, Wide Rubber-Coated Handle Allows For Easy & Comfortable Grip
- Tote Tray Inside To Store Smaller Items
View Details
|
T1300714 |
12" TOOLBOX WITH TRAY |
Out of stock |
Call for Price |
|
STST13011 |
|
|
UTILITY KNIFE QUICK CHANGE
Changing blades is a breeze with the Instantchange 6-5/8 in utility knife. Just press a button - no tools are needed! Plus its sturdy and ergonomic design ensures a comfortable grip and long-lasting durability.
- Strong, durable construction combines a cast metal core with bi-material soft panels for a sure grip
- Tool-free pushbutton blade change
- Curved handle design for comfort, control and balance
- Swing-out blade storage for easy blade access
- Integrated string cutter for use even when blade is retracted
- Large hang hole for pegboard storage
- Thumb pad and ergonomically designed cutting angle for more comfortable use
- Stores up to 10 blades in handle
- Interlocking nose design helps secure blade and helps prevent body separation
View Details
|
T10788 |
UTILITY KNIFE QUICK CHANGE |
Discontinued |
Call for Price |
|
10-788 |
|
