|
11911 4IN PLASTIC ROOF FLANGE
Slides Over Pipe For Pitch To 45 Degree. Non-Fading And Non-Cracking, Rigid Black Thermoplastic Base. Non-Fading, Sealing Collar. Rated 180 Degrees Fahrenheit Continuous Heat. Not For Hot-Mopped Or Built-Up Roofs. Do Not Use Petroleum-Based Products On Plastic Bases Or Rubber Collars.
- Thermoplastic Base
- 12" X 16" Base
- Opening Size In : 4
- Used With 4 In Pipe Diameter
- Non-Fading, Non-Cracking, Rigid Black Thermoplastic Base
- Self-Sealing Collar Slides Over Pipe And Requires No Caulking
- Do Not Use Petroleum Based Products Or Paint On Flashing Collar Or Plastic Base. Not For Hot-Mopped Or Built-Up Roofs
- Plastic Base For Pitch From 0 - 45 Deg Or Up To 12/12 Roof
- Rated 180 Deg F Continuous Heat And Approved For Type B Installations
- Used In Commercial And Residential Applications Where A Watertight Seal For Roof Penetrations Around The Plumbing Vent Pipe Is Required
View Details
|
H11911 |
11911 4IN PLASTIC ROOF FLANGE |
6 |
Call for Price |
|
11891 |
|
|
MASTER FLASHING EPDM 1/4" - 4"
Slides Over Pipe And Conforms To Any Roof Pitch. Use Silicone Sealant Between Base And Surface, And Secure With Sheet Screws. Multi-Size Pipe Sealing Range. Molds To Metal, Plastic, Etc. Non-Fading EDPM Collar. Rated 212 Degrees Fahrenheit Continuous Heat. Resists Weathering Due To Ozone And Ultraviolet Light. Approved For Type B Installations. Not For Hot-Mopped Or Built-Up Roofs. Do Not Use Paint Or Petroleum Based Products On Collar.
- Standard Base
- 8" X 8" Base
- Opening Size In : 1/4 To 4
- Used With 4 In Pipe Diameter
- Engineered For Profiled Roofing Systems At Any Pitch
- Rated 100 Deg C Continuous Heat And Approved For Type B Installations
- Easily Customized To Accommodate A Broad Range Of Pipe Diameters
- Used In Commercial And Residential Applications Where A Watertight Seal For Roof Penetrations Around The Plumbing Vent Pipe Is Required
View Details
|
H140520 |
MASTER FLASHING EPDM 1/4" - 4" |
3 |
Call for Price |
|
14052 |
|
|
STEP FLASHING 3 X 4 X 7 BROWN
Smaller Than Angle Flashing For Chimneys. Convenient Way To Flash The Wall To The Roof In An End Wall Application.
- Aluminum
- Pre-Bent
- Brown
- LxWxH In : 3 X 4 X 7
- Nom Thick : .011
- Smaller Than Angle Flashing For Chimneys
- Convenient Way To Flash The Wall To The Roof In An End Wall Application
View Details
|
H94247 |
STEP FLASHING 3 X 4 X 7 BROWN |
235 |
Call for Price |
|
6974319BX |
|
|
STEP FLASHING 3 X 4 X 7 BLACK
Smaller Than Angle Flashing For Chimneys. Convenient Way To Flash The Wall To The Roof In An End Wall Application.
- Aluminum
- Pre-Bent
- Black
- LxWxH In : 3 X 4 X 7
- Nom Thick : .011
- Smaller Than Angle Flashing For Chimneys
- Convenient Way To Flash The Wall To The Roof In An End Wall Application
View Details
|
H94245 |
STEP FLASHING 3 X 4 X 7 BLACK |
82 |
Call for Price |
|
6974335BX |
|
|
WET/DRY PLASTIC ROOF CEMENT 10.5
Repairs Leaks On WET Surfaces; Adheres Even Under Water. Also For Dry Surfaces. Spreads Easily In Cold Weather. Seals Around Chimneys, Vents, Skylights And Flashings. Heavy-Bodied, Smooth Spreading. ASTM D4586, Type I & ASTM D3409.
- HE208
- Black - Cartridge
- Size Oz : 10.1
- Adheres To All Surfaces Wet, Dry, Hot Or Cold
- Adheres Even Under Water
- Spreads Easily In Cold Weather
- Seals Around Chimneys, Vents, Skylights, Flashings
View Details
|
P51 |
WET/DRY PLASTIC ROOF CEMENT 10.5 |
8 |
Call for Price |
|
GC01103 |
|
|
11898 1-1/4 X 1/2 FLASHING
Slides Over Pipe For Pitch To 45 Degree. Non-Fading And Non-Cracking, Rigid Black Thermoplastic Base. Non-Fading, Sealing Collar. Rated 180 Degrees Fahrenheit Continuous Heat. Not For Hot-Mopped Or Built-Up Roofs. Do Not Use Petroleum-Based Products On Plastic Bases Or Rubber Collars.
- Thermoplastic Base
- 9-1/4" X 13" Base
- Opening Size In : 1-1/4 To 1-1/2
- Used With 1-1/4 X 1-1/2 In In Pipe Diameter
- Non-Fading, Non-Cracking, Rigid Black Thermoplastic Base
- Self-Sealing Collar Slides Over Pipe And Requires No Caulking
- Do Not Use Petroleum Based Products Or Paint On Flashing Collar Or Plastic Base. Not For Hot-Mopped Or Built-Up Roofs
- Plastic Base For Pitch From 0 - 45 Deg Or Up To 12/12 Roof
- Rated 180 Deg F Continuous Heat And Approved For Type B Installations
- Used In Commercial And Residential Applications Where A Watertight Seal For Roof Penetrations Around The Plumbing Vent Pipe Is Required
View Details
|
H11898 |
11898 1-1/4 X 1/2 FLASHING |
6 |
Call for Price |
|
11898 |
|
|
THROUGH THE ROOF CLEAR SEALANT
With Elasticity To Move With The Roof (Will Not Turn Brittle In Sun Or Cold); So Will Not Rip Out The Substrate When The Roof Moves. Strong Adhesion To A Wide Variety Of Roofing Materials To Keep Sealant From Pulling Away From Substrate. Sticks Even To Wet Surfaces. Apply In Standing Water Or Freezing Temperatures. Waterproof, Repels Water Immediately After Application And For Years To Come. Sticks To Galvanized Metal And Aluminum Flashing, Vents And Downspouts; Copper And Aluminum Roofing; PVC And ABS Vent Pipe; Neoprene And Plastic Pipe Flashing; Brick, Block, Mortar, Concrete And Fiber Cement Board; Acrylic And Polycarbonate Skylight Plastics; Asphalt, Wood, Steel, Paint And More. UV Resistant. 30 Minute Skin Time; 1 Week Cure Time. Clear For Letting Natural Color Show Through. Paintable With Latex Paint In 24 Hours, Or Oil-Based Paint Within 1 Week. Low Tack; 11 NTU Clarity; 21.8 Pli Average Dry Adhesion, 17.6 Pli Average Wet Adhesion. 330gms VOC. Use A 1/4" Bead Minimum When Applying. Covers 31 Lineal Feet.
- Caulk - For Rooftop Fixtures - Paintable
- Clear - Cartridge
- Size Oz : 10.5
- Elastomeric With Powerful Adhesion Stretches, Won0t Tear Crack Or Pull Away
- Ultra Clear
- Lasts 20 Times Longer Than Asphalt
- Can Be Applied To Wet Surfaces And Immediately Exposed To Rain Or Snow
- Adheres To Most Existing Roof Patches
- Exclusive Stop-Flow Plunger
- Won0t Freeze, High Durability
- Apply In Almost Any Weather
- Blends In With Roof, Won0t Stick Out
- Instantly Stops Leaks In Standing Water And Cold Temps
View Details
|
P14010 |
THROUGH THE ROOF CLEAR SEALANT |
25 |
Call for Price |
|
14010 |
|
|
FLASHING CEMENT GAL
Designed to repair cracks, seams and holes in roofing materials. Works on new construction and in setting flashings, drip edges and roofing material edges. Seals damaged areas and gives a layer of waterproof protection. Covers approximately 12 sq ft per gallon.
View Details
|
R0232580 |
FLASHING CEMENT GAL |
6 |
Call for Price |
|
6237.9.34 |
|
|
STEP FLASHING 5 X 5 X 7 ALUMINUM
Used To Flash The Wall To The Roof In An End Wall Application. The Smaller Pieces Can Be Very Helpful When Trying To Flash A Chimney.
- Aluminum
- Formed
- LxWxH In : 5 X 5 X 7
- Color : Unpainted
View Details
|
H06790 |
STEP FLASHING 5 X 5 X 7 ALUMINUM |
4 |
Call for Price |
|
6790 |
|
|
5/8” x 4’ x 8’ ZIP System Roof Sheathing
A strong, resilient roof is a home's first line of defense when the roof deck is exposed to the weather. Huber's ZIP System roof assembly combines their revolutionary integrated sheathing and flashing tape to provide a sealed roof for protection against moisture intrusion during construction. Trust ZIP System roof assembly to help fortify your home against the storm.
- Thickness: 5/8"
- Dimensions: 4' x 8'
- Easy to install
- Protects against water intrusion
- Avoid underlayment repair
View Details
|
58ZIP |
5/8” x 4’ x 8’ ZIP System Roof Sheathing |
416 |
Call for Price |
|
58ZIP |
|
|
1/2” x 4’ x 8’ ZIP System Roof Sheathing
A strong, resilient roof is a home's first line of defense when the roof deck is exposed to the weather. Huber's ZIP System roof assembly combines their revolutionary integrated sheathing and flashing tape to provide a sealed roof for protection against moisture intrusion during construction. Trust ZIP System roof assembly to help fortify your home against the storm.
- Thickness: 1/2"
- Dimensions: 4' x 8'
- Easy to install
- Protects against water intrusion
- Avoid underlayment repair
View Details
|
12ZIP |
1/2” x 4’ x 8’ ZIP System Roof Sheathing |
146 |
Call for Price |
|
|
|
|
WET/DRY PLASTIC ROOF COATNG 5GAL
Heavy-duty, fibered repair mastic designed to patch roof surfaces. Use in wet or dry conditions to seal and stop leaks around flashings, skylights, vent pipes, chimneys, and valleys. Ideal for the repair of cracks, seams, and holes in all roofing materials. It is also excellent for use below grade in heavy duty foundation water-proofing and damp-proofing. Formulated for year round use.
View Details
|
R0232581 |
WET/DRY PLASTIC ROOF COATNG 5GAL |
2 |
Call for Price |
|
0375-GA |
|
|
PLASTIC ROOF CEMENT GAL
Fibered Repair Mastic, Designed To Patch Roof Surfaces. Use In Wet Or Dry Conditions To Seal And Stop Leaks Around Flashings, Skylights, Vent Pipes, Chimneys And Valleys. For The Repair Of Cracks, Seams, And Holes In All Roofing Materials. Can Be Used Below Grade As A Heavy Duty Foundation Water-Proofing And Damp-Proofing. Thick Trowel Grade. Covers Approximately 12 Sq Ft Per Gallon When Applied 1/8" Thick.
- All Weather Plastic
- Size : 1 Gallon
- Stops Roof Leaks
- Use For Repair Or New Construction
- Use In Wet Or Dry Conditions
- Fiber Reinforced
View Details
|
R0232579 |
PLASTIC ROOF CEMENT GAL |
1 |
Call for Price |
|
0341-GA |
|
|
COPPER FLASHING 12" X 20'
- Copper flashing product specifically designed for pressure-treated deck construction
- Compatible with ACQ and all other treatments
- High performance copper wood frame flashing ideal for both termite control and moisture control where pressure treated wood is used on decks, sills and other applications
- Everlam technology isolates galvanized parts and protects from corrosion
- Two layers of self-sealing protection
- Non-asphalt
- 100% waterproof adhesive will not stain
- Resists temperatures up to 275F without separation
- UV protection for life
- Easy to form on site by hand
- Width x Length: 12" x 20'
- Thickness : 3 Oz Backing
- Material : Polypropylene
- For use on : Deck, Sills and Windows
View Details
|
H0200585 |
COPPER FLASHING 12" X 20' |
2 |
Call for Price |
|
RESYS0312/20 |
|
|
COPPER FLASHING 12" X 60' 3oz
- Copper flashing product specifically designed for pressure-treated deck construction
- Compatible with ACQ and all other treatments
- Ideal for both termite control and moisture control where pressure treated wood is used on decks, sills and other applications
- Everlam technology isolates galvanized parts and protects from corrosion
- Two layers of self-sealing protection
- Non-asphalt
- 100% waterproof adhesive will not stain
- Resists temperatures up to 275F without separation
- UV protection for life
- Easy to form on site by hand
- Width x Length: 12" x 60'
- Thickness : 3 Oz Backing
- Material : Polypropylene
- For use on: Deck, Sills and Windows
View Details
|
H0200584 |
COPPER FLASHING 12" X 60' 3oz |
4 |
Call for Price |
|
32217 |
|
